convert a front Wired gearbox to a rear wired gearbox

[aledek]

First question : I want to know is possible to convert a front Wired gearbox to a rear wired gearbox made by JG.

Seconde question, I want to know what you think about G&G m4 gearbox.

[ujiro]

1. Yes, just a simple job. Need to reroute and resolder a few wires (to make a clean job). You will probably have excess wires if it was originally front wired, so you may need to cut the excess off and reconnect the battery connector.

2. No hands on experience, but I have heard less than stellar things. They are cheap, and it shows through. You're better off buying a pre-made gearbox from a reputable company. SystemA mechboxes are absolutely amazing. I've had two and they were both incredible, worth every penny.

[aledek]

ok tanks

[Skruface]

If you suck at soldering, you can just buy an entire switch assembly and swap them.

http://www.airsoftparts.ca/store2/in...oducts_id=1018

[Styrak]

You'll have to open the mechbox, so if you have no experience with that you might want someone else with experience (like a gundoc) to do it.