|
HI-Capa 5.1 Vents mag
Hey everyone, i got a problem.
Few months back i bought a WE Hi-capa 5.1 and when i got it, i noticed the little tip on the loading nozzle that pushes the BBs from the mag was broken (though still hanging in there due to some sort of glue), so i bought a Guarder Enchanced Loading Nozzle to fix it. While i was at it i decided to buy a precision barrel and a Guarder Enhanced Recoil/Hammer Spring (150%). 2 weeks ago i finally got around to stripping the gun down and replacing all the parts.
Everything went smoothly, i lost no parts, i sprayed some silicone on it to make sure it ran ak, and when i go to fire the first mag, i cock the gun, press the trigger and instantly all the gas vents out trough the barrel.
I re-gas the mag, put it back in and same thing happens. I try with my second mag and still it happens. I take the gun apart yet again, replace it with all the old parts and its still happening.
At first i thought the recoul and hammer springs were too strong, but seeing as it didn't even work with the old ones, i decided to take a closer look. I noticed that when i fire the gun, even though the slide cycles back all the way, the piece that pushes into the mag to release the gas doesn't go back.
Can someone please help me? I've been looking for a solution to this for the past 2 weeks and still havent found anything. :banghead:
|
August 9th, 2009, 23:57
