|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
August 8th, 2009, 00:43 | #1 | |
Suburban Gun Runner
|
Handguard wobble
So I have an M4 with a Magpul MOE on it. I tried putting a foregrip on it but because the MOE is two seperate pieces the grip can be "flexed" from side to side quite a bit. Is there any solution to this problem? I really like the look of the MOE but would like to use a foregrip.
__________________
Quote:
|
|
August 8th, 2009, 02:42 | #2 |
What do you mean by wobble like slight moving? or is the handguard just moving around everywhere?
|
|
August 8th, 2009, 22:19 | #3 | |
Suburban Gun Runner
|
Well, its a twp piece handguard so I suspect that the whole problem. But because its two pieces they move independantly of each other. Its pnly a small amount but when I put a foregrip on it seems alot more. I can pull the foregrip from the left to the right about 2.5 to 3"s. Is this normal? Can I do anything about this besides getting a one piece handguard?
__________________
Quote:
|
|
August 8th, 2009, 23:12 | #4 |
That is not normal, Me thinks your barrel nut may be loose.
What brand gun? |
|
August 8th, 2009, 23:36 | #5 | |
Suburban Gun Runner
|
G&G, but I have a full metal receiver. Where and how can I check for this "loose" barrel nut you speak of?
EDIT: Ok so I founf the barrel nut, thought it was called the delta assembly. It was not loose at all. What else if anything could I try.
__________________
Quote:
Last edited by Eeyore; August 9th, 2009 at 13:34.. |
|
|
Bookmarks |
|
|