cant reassemble my shotgun

henoch · June 25th, 2009, 18:59

i have a stinger s34p, which is a tm m3 clone.
i cant find a way of attaching the rods to the place under the pump, because
there is a piece that goes over it that wont fit, and on side of the shotgun has it lso that once under the piece that you MUST put on top, it is immpissible to attach the rod.
it is pretty confusing and you probably wont know how to fix unless youve
experienced this youself

Flying Squirrel · June 25th, 2009, 19:04

Depending on how close it is to the Mauri M3 this site should work for you. Its the first article after the intro. Its got a pretty good description on how to disassemble and reassemble the shotty.

http://www.infernogmbh.iwarp.com/photo6.html

Flying Squirrel · June 25th, 2009, 19:29

It sounds like you don't have the hand guards removed from the pump slide carrier

- Remove the two screws below the hand guard and split it open to remove it from the carrier. (Only one side will come off.)

-At the bottom of the carrier you will see one single screw. Remove it to release the opposite side. (This should give you access to the 'underneath' part and the two rods connected on the slide.

Now you can access the two screws on the part forward of the magizine that is underneath handguard normally as well as the rod tops on the carrier assembly. That should give you the room you need to work.

Let us know if that worked. Sorry abut the picture quality, I only have a crappy camera phone at the moment.

Silverthorn · June 25th, 2009, 19:35

I have disassembled and reassembled the stinger recently and also an M3 clone over 15-20 times.

Please take pics of what you mean and I will easily help you.

henoch · June 25th, 2009, 20:01

i cant post pics right this moment, but i can tell you this. i have already gotten to the underneath part. a small thing that looks like a mini hand gard is underneath i cant fit those and the rods together in their proper spots. the mini handguard cant fit over the rods, and when i slip the rods under i cant manuaver them enought to get the little l-shapped tip on the rod at the end of the gear side of the gun.

Doombringer · June 25th, 2009, 20:12

Don't want to hijack the thread, but I reassembled my S34P and now, when I cock it, it won't lock into place as it was doing before (the front grip thingy), what part is responsible for this ?

lemegacool · June 25th, 2009, 20:20

Quote:

Originally Posted by Doombringer

Don't want to hijack the thread, but I reassembled my S34P and now, when I cock it, it won't lock into place as it was doing before (the front grip thingy), what part is responsible for this ?

there is a little latch with a spring in the gun, that locks the loading rods look for proper spring installation

Flying Squirrel · June 25th, 2009, 20:36

The website I posted above deals specifically with that.

Doombringer · June 25th, 2009, 20:36

Maybe I inverted the rods when reassembling...

edit: thx, I'll go read the website.

Doombringer · June 25th, 2009, 20:46

Ok I guess it's the little metal part on the side of the gun when you take it off, but I don't remember that it was spring-loaded as he is saying... Where would the spring go ?

henoch · June 25th, 2009, 22:28

i have given up on fixing my gun and am going to try to return it, even though i spray painted it. do you think i could sandpaper the spray paint off so it could look like i didnt
alter it (altering in any way voids the warranty). there is no way i am bying that gun again, because the price went back to 120$. I dont know if i am going to get another gun, unless it is under 70$.

ShelledPants · June 25th, 2009, 22:43

Quote:

Originally Posted by henoch

i have given up on fixing my gun and am going to try to return it, even though i spray painted it. do you think i could sandpaper the spray paint off so it could look like i didnt
alter it (altering in any way voids the warranty). there is no way i am bying that gun again, because the price went back to 120$. I dont know if i am going to get another gun, unless it is under 70$.

I lol'd.

swatt13 · June 26th, 2009, 01:37

Quote:

Originally Posted by henoch

i have given up on fixing my gun and am going to try to return it, even though i spray painted it. do you think i could sandpaper the spray paint off so it could look like i didnt
alter it (altering in any way voids the warranty). there is no way i am bying that gun again, because the price went back to 120$. I dont know if i am going to get another gun, unless it is under 70$.

GAH!!! milk out my nose!! that post gets the emmy for best post ever! +10 points to you good sir, +10pts.

Styrak · June 26th, 2009, 03:39

Quote:

Originally Posted by henoch

i have given up on fixing my gun and am going to try to return it, even though i spray painted it. do you think i could sandpaper the spray paint off so it could look like i didnt
alter it (altering in any way voids the warranty). there is no way i am bying that gun again, because the price went back to 120$. I dont know if i am going to get another gun, unless it is under 70$.

Lol.
No.

Silverthorn · June 26th, 2009, 08:11

Quote:

Originally Posted by henoch

i have given up on fixing my gun and am going to try to return it, even though i spray painted it. do you think i could sandpaper the spray paint off so it could look like i didnt
alter it (altering in any way voids the warranty). there is no way i am bying that gun again, because the price went back to 120$. I dont know if i am going to get another gun, unless it is under 70$.

Just take pictures and I will guide you. There is no way they will take the gun back. You made my day

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 25th, 2009, 18:59	#1
henoch Trader rating Join Date: Jun 2009	cant reassemble my shotgun i have a stinger s34p, which is a tm m3 clone. i cant find a way of attaching the rods to the place under the pump, because there is a piece that goes over it that wont fit, and on side of the shotgun has it lso that once under the piece that you MUST put on top, it is immpissible to attach the rod. it is pretty confusing and you probably wont know how to fix unless youve experienced this youself

June 25th, 2009, 19:04	#2
Flying Squirrel Trader rating Join Date: Apr 2005 Location: Victoria BC	Depending on how close it is to the Mauri M3 this site should work for you. Its the first article after the intro. Its got a pretty good description on how to disassemble and reassemble the shotty. http://www.infernogmbh.iwarp.com/photo6.html __________________ "I'm a Rocket Surgeon!" Certified Airsoft Level 2 Bolt-Action Sharp-shooter

June 25th, 2009, 19:29	#3
Flying Squirrel Trader rating Join Date: Apr 2005 Location: Victoria BC	It sounds like you don't have the hand guards removed from the pump slide carrier - Remove the two screws below the hand guard and split it open to remove it from the carrier. (Only one side will come off.) -At the bottom of the carrier you will see one single screw. Remove it to release the opposite side. (This should give you access to the 'underneath' part and the two rods connected on the slide. Now you can access the two screws on the part forward of the magizine that is underneath handguard normally as well as the rod tops on the carrier assembly. That should give you the room you need to work. Let us know if that worked. Sorry abut the picture quality, I only have a crappy camera phone at the moment. __________________ "I'm a Rocket Surgeon!" Certified Airsoft Level 2 Bolt-Action Sharp-shooter Last edited by Flying Squirrel; June 25th, 2009 at 19:49.. Reason: Added pictures

June 25th, 2009, 19:35	#4
Silverthorn Trader rating Join Date: Mar 2008 Location: Sainte-Julie, Quebec	I have disassembled and reassembled the stinger recently and also an M3 clone over 15-20 times. Please take pics of what you mean and I will easily help you. __________________ Team N.A.P.K.I.N.S (Ninjas And Pirates Kommando Infiltration Night-ops Specialists)

June 25th, 2009, 20:01	#5
henoch Trader rating Join Date: Jun 2009	i cant post pics right this moment, but i can tell you this. i have already gotten to the underneath part. a small thing that looks like a mini hand gard is underneath i cant fit those and the rods together in their proper spots. the mini handguard cant fit over the rods, and when i slip the rods under i cant manuaver them enought to get the little l-shapped tip on the rod at the end of the gear side of the gun. Last edited by henoch; June 25th, 2009 at 20:09..

June 25th, 2009, 20:12	#6
Doombringer Trader rating Join Date: Feb 2005 Location: Plateau, Montreal	Don't want to hijack the thread, but I reassembled my S34P and now, when I cock it, it won't lock into place as it was doing before (the front grip thingy), what part is responsible for this ?

June 25th, 2009, 20:36	#8
Flying Squirrel Trader rating Join Date: Apr 2005 Location: Victoria BC	The website I posted above deals specifically with that. __________________ "I'm a Rocket Surgeon!" Certified Airsoft Level 2 Bolt-Action Sharp-shooter

June 25th, 2009, 20:46	#10
Doombringer Trader rating Join Date: Feb 2005 Location: Plateau, Montreal	Ok I guess it's the little metal part on the side of the gun when you take it off, but I don't remember that it was spring-loaded as he is saying... Where would the spring go ?

June 25th, 2009, 22:28	#11
henoch Trader rating Join Date: Jun 2009	i have given up on fixing my gun and am going to try to return it, even though i spray painted it. do you think i could sandpaper the spray paint off so it could look like i didnt alter it (altering in any way voids the warranty). there is no way i am bying that gun again, because the price went back to 120$. I dont know if i am going to get another gun, unless it is under 70$.

cant reassemble my shotgun

Doctor's Corner