Need help! Classic Army G36 performance issue

SharksRule · March 22nd, 2009, 23:27

Hi, I have a Classic Army g36c and it worked fine for a while. Then something was weird so I took the gearbox apart and then everything was fin, the gears spun properly the motor spun fine and everything. So I put the gearbox back together, then I put it in the gun, screwed everything and done. I just fired it just to see if it shot, and the rate of fire was fine! So i put my magazine in and gues what? The bb's went only 1 feet and fell. I was like WTF! So I took it apart again, and EVERYTHING WAS FINE! So I checked youtube to see if I put things back properly and I did. I don't know whats happening so please help!

The Saint · March 22nd, 2009, 23:29

You didn't accidentally pinch the battery wires between your hopup unit and mechbox, did you? That'd prevent the hopup unit from making the nozzle properly and you'd be losing air all over the place.

ujiro · March 22nd, 2009, 23:29

Did you put the tappet plate spring back in? That sounds like it could be caused by the tappet plate spring missing. Otherwise there is some serious compression issue, where the piston head is getting 0 seal in the cylinder.

SharksRule · March 22nd, 2009, 23:31

I'm not lying to you and I have no need to lie cause I need help. Everything is in the correct place, and the rate of fire and everything is just perfect! The wiring could be, lemme check.

ujiro · March 22nd, 2009, 23:36

Yeah that sounds more like it then. Something is causing something to be misaligned and not getting good seal.

SharksRule · March 22nd, 2009, 23:39

I looked at EVERYTHING and moved some wires a little and it still doesn't shoot properly. The bbs just comes out of the barrle and drops.

KNIVEZS · March 22nd, 2009, 23:44

YouTube - M2U00767

kinda have the same problem w/ my ak. thee bb's just drop out of the barrel

SharksRule · March 22nd, 2009, 23:47

YEAH! Thats my EXACT problem except my rate of fire sounds fine. For my shooting, it sounds normal but the performance not so much. For mine the bbs all "drop" every shot i take, so around 12 bbs "drop" a second. I NEED A SOLUTION!!

wildcard · March 22nd, 2009, 23:51

have you try the hop up??

KNIVEZS · March 22nd, 2009, 23:53

a gundoc told me that its probably the hop-up rubber is torn

ujiro · March 22nd, 2009, 23:53

Yeah, hop up could be entirely on, and blocking the barrel

HaloSix4 · March 22nd, 2009, 23:57

Try the Hop-up rubber, I had an old TM MP5 that had this problem, i sold it for $100 thinking it was dead, the buyer then told me he fixed it with an new hop-up rubber. So try that.

SharksRule · March 23rd, 2009, 00:07

Thanks guys, ill try it

SharksRule · March 23rd, 2009, 01:49

I tried, and I fiddled with the hop up and I took it apart and did stuff with this circular rubber thing and guess wut? The bbs don't drop but they shoot 2 feet now! but not even close to what it used to shoot like. PLease help, cause i dont this its the hop up!

wildcard · March 23rd, 2009, 08:38

OK two things, first adjust hop up by turning it off (Opposite way oof the arrow inscribed on the wheel) then turn it slowly bit by bit and fire a round each time until your BB's are flying straight.
If That didn't work then disassembled your front end and check the hop up rubber see if it is torn or worse yet see if it is sitting properly in the grove (the little slit in your barrel)

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 22nd, 2009, 23:27	#1
SharksRule Trader rating Join Date: Mar 2009	Need help! Classic Army G36 performance issue Hi, I have a Classic Army g36c and it worked fine for a while. Then something was weird so I took the gearbox apart and then everything was fin, the gears spun properly the motor spun fine and everything. So I put the gearbox back together, then I put it in the gun, screwed everything and done. I just fired it just to see if it shot, and the rate of fire was fine! So i put my magazine in and gues what? The bb's went only 1 feet and fell. I was like WTF! So I took it apart again, and EVERYTHING WAS FINE! So I checked youtube to see if I put things back properly and I did. I don't know whats happening so please help!

March 22nd, 2009, 23:29	#2
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	You didn't accidentally pinch the battery wires between your hopup unit and mechbox, did you? That'd prevent the hopup unit from making the nozzle properly and you'd be losing air all over the place. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

March 22nd, 2009, 23:29	#3
ujiro Trader rating Join Date: Aug 2006 Location: Burlington, ON	Did you put the tappet plate spring back in? That sounds like it could be caused by the tappet plate spring missing. Otherwise there is some serious compression issue, where the piston head is getting 0 seal in the cylinder. __________________ I love freedom and consequently America

March 22nd, 2009, 23:31	#4
SharksRule Trader rating Join Date: Mar 2009	I'm not lying to you and I have no need to lie cause I need help. Everything is in the correct place, and the rate of fire and everything is just perfect! The wiring could be, lemme check.

March 22nd, 2009, 23:36	#5
ujiro Trader rating Join Date: Aug 2006 Location: Burlington, ON	Yeah that sounds more like it then. Something is causing something to be misaligned and not getting good seal. __________________ I love freedom and consequently America

March 22nd, 2009, 23:39	#6
SharksRule Trader rating Join Date: Mar 2009	I looked at EVERYTHING and moved some wires a little and it still doesn't shoot properly. The bbs just comes out of the barrle and drops.

March 22nd, 2009, 23:47	#8
SharksRule Trader rating Join Date: Mar 2009	YEAH! Thats my EXACT problem except my rate of fire sounds fine. For my shooting, it sounds normal but the performance not so much. For mine the bbs all "drop" every shot i take, so around 12 bbs "drop" a second. I NEED A SOLUTION!!

March 22nd, 2009, 23:51	#9
wildcard Trader rating Join Date: Dec 2001 Location: In my man cave	have you try the hop up??

March 22nd, 2009, 23:53	#11
ujiro Trader rating Join Date: Aug 2006 Location: Burlington, ON	Yeah, hop up could be entirely on, and blocking the barrel __________________ I love freedom and consequently America

March 22nd, 2009, 23:57	#12
HaloSix4 aka Halo64 Trader rating Join Date: Jul 2007 Location: Omemee, ON	Try the Hop-up rubber, I had an old TM MP5 that had this problem, i sold it for $100 thinking it was dead, the buyer then told me he fixed it with an new hop-up rubber. So try that. Last edited by HaloSix4; March 23rd, 2009 at 00:00..

March 23rd, 2009, 00:07	#13
SharksRule Trader rating Join Date: Mar 2009	Thanks guys, ill try it

March 23rd, 2009, 01:49	#14
SharksRule Trader rating Join Date: Mar 2009	I tried, and I fiddled with the hop up and I took it apart and did stuff with this circular rubber thing and guess wut? The bbs don't drop but they shoot 2 feet now! but not even close to what it used to shoot like. PLease help, cause i dont this its the hop up!

March 23rd, 2009, 08:38	#15
wildcard Trader rating Join Date: Dec 2001 Location: In my man cave	OK two things, first adjust hop up by turning it off (Opposite way oof the arrow inscribed on the wheel) then turn it slowly bit by bit and fire a round each time until your BB's are flying straight. If That didn't work then disassembled your front end and check the hop up rubber see if it is torn or worse yet see if it is sitting properly in the grove (the little slit in your barrel)

Need help! Classic Army G36 performance issue

Newbie Tank