|
|
|
February 23rd, 2009, 10:10
|
#1 |
|
Upgrading a gr16 G&G
I literally just bought this gun, what sort of parts should I be keeping an eye out for in the near future to upgrade it.
__________________
Пусть он землю бережет родную, А любовь Катюша сбережет |
|
|
|
February 23rd, 2009, 10:16
|
#2 | |
|
If the gun has the bearing bushings those may go fast. Its better to have a solid bushing than ball bearing bushing.
Also your spring guide might jam since its plastic on plastic to create a ball bearing like spring guide. Also a tightbore barrel would be a good investment. That all said play with it stock for about a yr. and you will know what needs to be done in that time.
__________________
Quote:
|
|
|
|
|
|
February 23rd, 2009, 12:03
|
#3 |
|
If you just bought your first airsoft gun... don't upgrade it until something breaks. Don't invest too much into it until you know you really like the game, and then upgrade it based on what you think it needs.
__________________
 Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life. |
|
|
|
|
February 23rd, 2009, 12:19
|
#4 |
|
|
I'm just asking in general, there's nothing that needs to be replaced on this gun then? I've heard pretty good things
__________________
Пусть он землю бережет родную, А любовь Катюша сбережет |
|
|
|
|
February 23rd, 2009, 12:30
|
#5 | |
|
Reshim it. G&G guns are known for their bad shim jobs.
__________________
 Quote:
|
|
|
|
|
|
February 23rd, 2009, 12:33
|
#6 |
|
Really? Mine was pretty well shimmed.
Check to see if the mechbox needs reshimming before opening it. Poke the gear axle from the sides. If they move more than 0.5mm, you could stand to reshim them. Otherwise, this is your first gun, if it works, leave it alone.
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame." |
|
|
|
|
February 23rd, 2009, 12:47
|
#7 | |
|
|
Quote:
ugh, i can't get the dust cover to open, its so embarassing
__________________
Пусть он землю бережет родную, А любовь Катюша сбережет |
|
|
|
|
|
February 23rd, 2009, 12:52
|
#8 | |
|
Quote:
Sounds like you don't have any experience with AEG's, so leave it alone and don't try opening it.
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
|
February 23rd, 2009, 12:54
|
#9 |
|
|
Styrak is right, if you can't even get the dust cover to open, you have no business going inside your rifle at this time.
Have you tried pulling the charging handle back to release the dust cover?
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame." |
|
|
|
|
February 23rd, 2009, 12:55
|
#10 | |
|
|
:'( I have, the dust cover has some sort of reverse spring action that the kind sir that sold it to me showed me how to open it.
Then i proceeded to not know how to open it ever again.... time to hit up youtube Quote:
__________________
Пусть он землю бережет родную, А любовь Катюша сбережет Last edited by The Saint; February 23rd, 2009 at 12:58.. |
|
|
|
|
|
February 23rd, 2009, 12:58
|
#11 |
|
I'd just leave it alone until you actually need to do something to it. Get used to the gun and how it performs. You'll know what it needs after a couple of games.
The dust cover on G&G is held closed by a spring and is opposite what most other armalite AEGs. With others, you just cock the charging handle and the dust cover springs open. G&G mount the spring backwards to keep the cover closed and have no other locking mechanism. Just pry it open with your fingernails or a small flat head screwdriver to get to the hopup adjustment.
__________________
|
|
|
|
|
February 23rd, 2009, 13:03
|
#12 |
|
|
Crunch, not all G&Gs use the reverse spring. Many of the ones in Canada (transparent receiver) have normal working releases.
phantastik, you should be able to release the dust cover by a backup means. Find a needle (or anything equally sharp and pointy). Look at the dark block structure on the outside of the dust cover. That houses the catch. Along the top edge of the block, there should be a small hole (it's more elongated than round). Poke the needle into it and push down, that should release the catch and drop the dust cover open.
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame." |
|
|
|
|
February 23rd, 2009, 13:04
|
#13 |
|
|
Ok, I was under the impression that this was a common thing with all G&Gs, at least the ones that I've seen to date...
__________________
|
|
|
|
|
February 23rd, 2009, 13:08
|
#14 |
|
|
Regular G&G metal lines (with a few exception) don't have a dust cover release, but can be fitted with one. Their plastica lines have the dust cover release. No idea why they'd put the good feature in the cheap guns and not the metal guns.
I know first hand that VA's G&G have working releases, won't surprise me if other cansoft G&Gs do as well.
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame." |
|
|
|
|
February 23rd, 2009, 13:10
|
#15 |
|
|
Ok great, i'll try it when i get home from work today, I didnt want to bother the poor guy @ the VA booth any longer after asking 20000 questions.
__________________
Пусть он землю бережет родную, А любовь Катюша сбережет |
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
