New gun...Feed problem

-Per- · July 22nd, 2008, 13:46

Hi, so like I said, my gun is brand new ( home made )...It's a M4...Here's my problem...When I try to shoot, my gun doesn't...Pretty simple right ?

...My gearbox runs without any problem...When I put a single BB into the hopup "chamber" ( directly in front of the nozzle ), it shoots without any problem...

But when I put a mag on and I pull the trigger,nothing happens...the gearbox does its cycle, but no BBs leave the barrel and no BBs go in front of the nozzle...

Mag problem ? Nozzle problem ?...HALP !

...

thk,
Per

The Saint · July 22nd, 2008, 13:54

What kind of a gun is it?

If your nozzle is moving, it's probably not a nozzle problem. Is your nozzle moving?

When you insert the mag and then remove it, do any BBs fall out of your gun? If no BBs fall out, it's probably a mag issue.

Bissa · July 22nd, 2008, 13:58

sounds like a mag problem. if the thing that holds the BBs in your mag isent getting pulled all the way out of the way, it wont feed BBs into the gun. or the mag might not be sitting right.
that is my 2¢

-Per- · July 22nd, 2008, 14:01

The nozzle move and the BBs fall out

...The BBs go into the hopup but not in front of the nozzle...

The Saint · July 22nd, 2008, 14:03

Try spray a little bit of silicon oil down the feed hole into the hopup chamber. Maybe it's just friction keeping the BBs from feeding properly up the pipe and into the chamber.

eV.Viper · July 22nd, 2008, 14:21

If you're using king arms mags, you should try to apply a pression upward on the mag to see if it feed.

-Per- · July 22nd, 2008, 14:22

problem found...

It's a misalignement between the mag and the hopup...

thk guys...

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 22nd, 2008, 13:46	#1
-Per- Trader rating Join Date: Apr 2004 Location: Montreal,Qc	New gun...Feed problem Hi, so like I said, my gun is brand new ( home made )...It's a M4...Here's my problem...When I try to shoot, my gun doesn't...Pretty simple right ? ...My gearbox runs without any problem...When I put a single BB into the hopup "chamber" ( directly in front of the nozzle ), it shoots without any problem... But when I put a mag on and I pull the trigger,nothing happens...the gearbox does its cycle, but no BBs leave the barrel and no BBs go in front of the nozzle... Mag problem ? Nozzle problem ?...HALP ! ... thk, Per Last edited by -Per-; July 22nd, 2008 at 13:58..

July 22nd, 2008, 13:54	#2
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	What kind of a gun is it? If your nozzle is moving, it's probably not a nozzle problem. Is your nozzle moving? When you insert the mag and then remove it, do any BBs fall out of your gun? If no BBs fall out, it's probably a mag issue. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

July 22nd, 2008, 14:03	#5
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Try spray a little bit of silicon oil down the feed hole into the hopup chamber. Maybe it's just friction keeping the BBs from feeding properly up the pipe and into the chamber. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

July 22nd, 2008, 14:01	#4
-Per- Trader rating Join Date: Apr 2004 Location: Montreal,Qc	The nozzle move and the BBs fall out ...The BBs go into the hopup but not in front of the nozzle...

July 22nd, 2008, 14:21	#6
eV.Viper Trader rating Join Date: Jun 2006 Location: Montreal, Quebec	If you're using king arms mags, you should try to apply a pression upward on the mag to see if it feed. __________________ Aka Raptor TM M3 Shorty KJW Beretta M9

July 22nd, 2008, 14:22	#7
-Per- Trader rating Join Date: Apr 2004 Location: Montreal,Qc	problem found... It's a misalignement between the mag and the hopup... thk guys...

New gun...Feed problem

Doctor's Corner