Airsoft Canada

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

MechBox Testing

:

Doctor's Corner

Reply
 
Thread Tools
Old January 26th, 2008, 15:53   #1
IggysPiggy
 
Join Date: Sep 2007
MechBox Testing

Ok I am new to tearing into mechbox's I have learned all on my own and in some hard ways but can I test my mechboxes out of the gun casing itself. I broke down finally and got XT to do my shimming. Once I got it back from them I gave her the first test shot expecting a nice burst and was met with nothing. Looked into it figured out my main reciever body was broken so I figured meh no biggy popped the mech box out of the gun hooked it back up and pulled the trig and nothing happened, piled up instantly. now think its just a bad shim job or can I not fire the box out of the receiver ( Its a TM ak 47 mech v3 with a 120 hurricane kit in it, bat is a 8.4v 1800 mah)? As well if the motor is old would it not crank my 120m spring?

any help is much appreciated cheers
IggysPiggy is offline   Reply With Quote
Old January 26th, 2008, 16:44   #2
Donster
 
Donster's Avatar
 
Join Date: Jul 2007
Location: GTA
try a 9.6v battery. 8.4 seems a little weak for a 120 spring.
Donster is offline   Reply With Quote
Old January 26th, 2008, 16:48   #3
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
A 1800 mAh 8.4V should work fine with an M120. I run mine with an 8.4V 1500 mAh
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old January 26th, 2008, 17:35   #4
IggysPiggy
 
Join Date: Sep 2007
Yah see thats what I was told I will give a 9.6 a shot but really an 8.4 should push it especially with the kit. think my motor could be old and worn out...? I can manage to get the piston to cycle all the way back but it SEEMS to be jamming on the last tooth as if theres not enough juice to puch it past....
IggysPiggy is offline   Reply With Quote
Old January 26th, 2008, 17:50   #5
Nilz
 
Join Date: Oct 2005
Location: victoria BC
if your mechbox does nothing when you pull the trigger.

-check the battery is hooked up properly
-check if the battery has voltage
-check fuse
-check for crimps in the wires
if everything is fine check voltage at the motor, chances are your motors toast.

if you can get the gears to cycle the piston back and then everyhthing locks up.
-your piston may not be aligned to the rails in the mechbox
-your box was shimmed by a monkey

at this point its time to rip it open and have some fun
Nilz is offline   Reply With Quote
Old January 26th, 2008, 22:18   #6
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Poor shimming seems probable as I've seen an 8.4 1100mah battery do 400fps on standard gears. However it only does semi with the first 20% of the battery, and if you stop at a point where the spring is compressed it jams and you need to hookup a more powerful battery to get it going again lol
Sounds like your in winnipeg, lots of competent gunsmiths outside of XT! Are you on the MAA forums?
ThunderCactus is offline   Reply With Quote
Old January 26th, 2008, 23:44   #7
caboose36
 
caboose36's Avatar
 
Join Date: Nov 2007
Location: Winnipeg, Manitoba
Do they only have one gunsmith at XT? I have talked to Bryan a couple times, and he did some work on my mechboxes a couple times too.
caboose36 is offline   Reply With Quote
Old January 27th, 2008, 00:32   #8
IggysPiggy
 
Join Date: Sep 2007
no bash to anyone at xt i play there all the time. I am on the maa website cactus under the same name. as for wiring I am competent on that and no problems there, as for shimming it was shimmed by a gunsmith not a monkey lol. the battery is full i even re wired it for a larger connector and tried my other bat and still nothing , the rails seem to be linning up fine. I figured brush set in motor so i think ill jsut buy motor ( anyone got a tm ak style one lol?) and if that dont fix it well scrape parts are always useful lol. and as for gunsmithing i am trying to learn my own stuff here as i have a couple mode projects on the way. but I might be in need of a smith to put together a system 1 j turbo set into an mp5 setup lol.
IggysPiggy is offline   Reply With Quote
Old January 27th, 2008, 00:34   #9
IggysPiggy
 
Join Date: Sep 2007
you dont play at xt do you cactus...?
IggysPiggy is offline   Reply With Quote
Old January 27th, 2008, 00:39   #10
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Once a month or so
ThunderCactus is offline   Reply With Quote
Old January 27th, 2008, 16:26   #11
IggysPiggy
 
Join Date: Sep 2007
but no one has still answered on of my q's can I fire the mechbox outside of the main body reciever...? or does it have to be installed with all the safety and selector plate installed on it...?
IggysPiggy is offline   Reply With Quote
Old January 27th, 2008, 18:39   #12
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
You can fire it outside of the gun, it just has to have the lower receiver on it otherwise you cant line up the motor properly.
ThunderCactus is offline   Reply With Quote
Old January 27th, 2008, 18:46   #13
dodger_me
 
dodger_me's Avatar
 
Join Date: Feb 2007
Location: Calgary, AB
its a v3 so motor alignment isnt a problem, it will fire fine out of the gun.
__________________

Quote:
Originally Posted by .Andrew. View Post
turns out i had to take the battey out of the stock and charge it right from the battery wire..not the wire that connects to the gun
dodger_me is offline   Reply With Quote
Old January 27th, 2008, 21:10   #14
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Sorry i was thinking of armalites for some reason
ThunderCactus is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada

All times are GMT -4. The time now is 04:35.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.