|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
November 12th, 2006, 17:26 | #1 |
G&P M4 takedown troubles
I have a G&P M4 (my first M4 by the way) that I am trying to take apart since it has ceased to function. I am trying to get the pistol grip off, but there are two small hexagonal screws at both ends that I just cant seem to unscrew. I am using a T9 torx wrench, which seems to be just right, and nothing is budging. It just seems that the screws' edges are wearing down.
Am I doing something wrong to take off the pistol grip or what?
__________________
KWA M11 WGC Custom M4 Commando |
|
November 13th, 2006, 05:14 | #2 | |
* AV Status REVOKED *
|
Quote:
__________________
|
|
November 13th, 2006, 12:12 | #3 |
The screws in my old G&P M4A1's pistol grips (you mean inside where the motor sits right?) were phillips head. They use some pretty strong thread lock so you'll have to use quite a bit of force, just make sure you're using the right bit.
|
|
November 13th, 2006, 12:54 | #4 |
I have just rebuilt my G&P M4 Commando and it
had allen head screws ,but use a good quality allen wrench as the thread lock holds the screws in tight. |
|
November 13th, 2006, 14:09 | #5 |
Traveling Man
|
yea G&P uses LockTight on their pistol grip screws, first time popping them is a bitch.
|
|
Bookmarks |
|
|