M9 issues. Identity crisis, or farked seals?

[Lakonian]

My m9 seems to be confused; it is under the impression that it's a 93R. I gassed it up today (thanks to Identity, who's service was A1) and it appears that it fires three rounds in rapid succession.
I was just wondering... is the problem with the seals, or is something just over lubed (or is the gun just going through an identity crisis)? The M9 is a WA mil-spec. It's been fielded 7 times, so I don't know what could be wrong with it.

[Identity]

Not my problem, the gas should run perfect on your gun... I think your M9 has problems and needs to be brought to a gbb doctor.
You might have got it at a really dirt cheap price because it has alot of problems. The M9 you got should be more expensive than $150, this is why I HATE WA. Not much poeple can find parts for it.

When you mean identity crisis do you mean I am the problem? I sold you genuine bottles of Duster gas made by MG Chemicals. Your gun has problems, I've used the same gas on my 4.3 and had no problems.

[Lakonian]

Originally Posted by Identity

Not my problem, the gas should run perfect on your gun... I think your M9 has problems and needs to be brought to a gbb doctor.
You might have got it at a really dirt cheap price because it has alot of problems. The M9 you got should be more expensive than $150, this is why I HATE WA. Not much poeple can find parts for it.

When you mean identity crisis do you mean I am the problem? I sold you genuine bottles of Duster gas made by MG Chemicals. Your gun has problems, I've used the same gas on my 4.3 and had no problems.

Oh, I know. Your service was A1 . :P Don't worry bud. hahah, sorry for the misunderstanding! The gas is VERY nice on my USP by the way!

[Identity]

Originally Posted by kos

Oh, I know. Your service was A1 . :P Don't worry bud. hahah, sorry for the misunderstanding! The gas is VERY nice on my USP by the way!

Hehehe thanks! Yeah the gas should run well on any gun. I think your WA is having problems and think's as if it has burst mode! Haha. And at least the gas doesn't smell bad like propane! Propane smells like fart... :sad:

[Lakonian]

LOL! yeah, I noticed a lack of that genuine "room mate aroma". I suspect the seals are fucked, or the recoil spring has been screwed with. Unfortunately, I don't have the time to test it.. So I might just hang it in my room. :P

Hey where's that "most expensive paper weight" thread?

[Lakonian]

problem still stands.

[ToRN]

you don't need to, nor ar you allowed to, bump after less than a day.
Please read the rules before posting.

[p.phresh]

Check part 75 on this diagram (spring attached to the blowback mechanism):
http://tech.airsoftcanada.com/WA/WA_BERETTA_M92FS.jpg

It is prolly borked.

[Identity]

Originally Posted by p.phresh

Check part 75 on this diagram (spring attached to the blowback mechanism):
http://tech.airsoftcanada.com/WA/WA_BERETTA_M92FS.jpg

It is prolly borked.

Man... I always have trouble reading those damn manuals! It looks so complicated and it seems like when you wanna take it apart you have to take off every apart with it. Damn. Why can't it be step by step like the Lego manuals! Ah... Good old days. Lego... :-)

[Lakonian]

Originally Posted by p.phresh

Check part 75 on this diagram (spring attached to the blowback mechanism):
http://tech.airsoftcanada.com/WA/WA_BERETTA_M92FS.jpg

It is prolly borked.

Negative. It's all good. I checked the mag, and checked the blowback mechanism; everything seemed in check. However, when I reassembled everything, it worked...for about 20 shots, then went back to the same problem.

[hattrick]

My ->guess<- would be underlube. The part however i couldnt pick off that diagram, if it works anything like ksc glocks/usp's it would be the peice in this link, not returning to its upright position.

http://img80.imageshack.us/my.php?im...probleman8.jpg

what does this mean?!

1) underlube around this peice.
2) On the other side of the grass.
The indentation on the slide may have dirt in it. Not allowing the peice to return to the upright position. (where on the slide you ask? - it would be the spot above this peice, when the slide is forward of course)

.....5rd edit. There is a person on asc whom has turned many gbb's into full auto monsters, this can be done by filling down the peice highlighted. The flaw(s) lay in the gbb model itsself. (ie: hammer doesnt return all the way) Not to mention your gbb will never be semi again

No, Im not retardddded. I know i said 5rd, it sounds funny.

[Lakonian]

Originally Posted by neir

My ->guess<- would be underlube. The part however i couldnt pick off that diagram, if it works anything like ksc glocks/usp's it would be the peice in this link, not returning to its upright position.

http://img80.imageshack.us/my.php?im...probleman8.jpg

what does this mean?!

1) underlube around this peice.
2) On the other side of the grass.
The indentation on the slide may have dirt in it. Not allowing the peice to return to the upright position. (where on the slide you ask? - it would be the spot above this peice, when the slide is forward of course)

.....5rd edit. There is a person on asc whom has turned many gbb's into full auto monsters, this can be done by filling down the peice highlighted. The flaw(s) lay in the gbb model itsself. (ie: hammer doesnt return all the way) Not to mention your gbb will never be semi again

No, Im not retardddded. I know i said 5rd, it sounds funny.

Negative.
That tab seems to be fine. I'll try to find a gun doc; That's all I can really do.

Nice usp
from usp owner to usp owner