Old MP5K

OfficerChan · June 25th, 2006, 08:51

I have an old TM MP5K, by old, I mean like 7years+ old. Anyways, I had to clean out the gun and re-lube everything. But it doesn't work. The motar works, because when I pull the trigger, I hear a "click" sound and at the same time I feel a little jump coming from the motar. I've checked all the gears and everything seems to be fine, the gears spin when I push it, but it won't spin when I stick the motor in. Any ideas? I've spent several nights trying to get it to work, I've had 2 of my friends look at it and we can't seem to figure out whats wrong with it.

Ghost Snake · June 25th, 2006, 09:55

While it may seem stupid, make sure the battery is connected the right way. One time I connected the battery wrong (reversed polarity) on my G36, and it did exactly what you were describing. The motor made a little "click" sound, but nothing else.

odp · June 25th, 2006, 15:27

Try the motor outside the mechbox to see if the battery will power the motor.

Also, what are the teeth on the pinion gear like? What spring is it running?

OfficerChan · June 25th, 2006, 16:48

The motor spins when its out of the mechbox and I also looked at all the gears, everything seems to be fine, well, its a TM. The teeth on the piston is fine also. Everything SEEMS fine, I have no idea what kind of spring its running, its used and the owner doesn't remember what he did to it.

BC_K · June 25th, 2006, 17:11

Message this guy, he can help ya. I've had him work on my MP5K before.

http://www.airsoftcanada.com/member....poster&t=27593

Mantelope · June 25th, 2006, 17:52

Maybe you put the motor in backwards? I'd say at least 50% of these problems are from the motor going in the wrong way around.

OfficerChan · June 25th, 2006, 18:52

But the motor only goes in one way, the gear pointing up. Unless the motor is left and right side specific, which i don't think so, since it just spins, it doesn't matter whether you have it left or right.

Pliskin · June 25th, 2006, 19:33

Quote:

Originally Posted by OfficerChan

But the motor only goes in one way, the gear pointing up. Unless the motor is left and right side specific, which i don't think so, since it just spins, it doesn't matter whether you have it left or right.

No reason not to try it. If you want it fixed you've gotta try it all.

Trader rating · June 25th, 2006, 19:39

i had a problem with my MP5K, with the wiring backwards. would blow a fuse and gun wouldnt cycle simply because it was running against the anti-reversal latch.

Mantelope · June 25th, 2006, 21:34

Quote:

Originally Posted by OfficerChan

But the motor only goes in one way, the gear pointing up. Unless the motor is left and right side specific, which i don't think so, since it just spins, it doesn't matter whether you have it left or right.

Yes, front/back does matter. It changes which contacts the wires connect to, which change the direction of motor rotation. The motor spinning the wrong way sounds exactly like what you're describing.

OfficerChan · June 26th, 2006, 00:32

Ghost Snake got it, I did reverse the wiring, I guess re-assembling a mechbox in the middle of the night doesn't help. Man, I can't believe I over looked the wiring like that. Thanks a lot guys. But now I have another problem, once I switched the wires, the gun fired, and it shot out the air nozzle, which broke around the part where it attaches to the tappet plate. I'm wondering, can I just glue the air nozzle and the tappet plate together? Because I'm thinking of ordering a new air nozzle from ASA, but I hate waiting.

porry · June 26th, 2006, 00:44

i wouldnt recommend gluing. Buy a new airnozzle. Your tappet plate broke too? well get one of those. The glue may not provide a perfect seal

Renegade) · June 26th, 2006, 01:32

Quote:

Originally Posted by porry

i wouldnt recommend gluing. Buy a new airnozzle. Your tappet plate broke too? well get one of those. The glue may not provide a perfect seal

I agree, no shotty repairs for your gun man, no glue at all unless its an exterior piece. Buy new, dont cheap out on repairs or youll end up dishing out way more then what you should have in the first place.

OfficerChan · June 27th, 2006, 03:09

Yeah, I decided to just buy a new nozzle, no point repairing the gun again when things break. Can't cheap out on guns. THanks guys.

JohnnyDo · June 27th, 2006, 03:23

you may want to consider getting a new tappet plate as well just in case a crack developed in it while your nozzel broke. They are cheap enough and since your mech box is apart it's worht while to do it all at the same time.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 25th, 2006, 08:51	#1
OfficerChan Trader rating Join Date: May 2006 Location: BC	Old MP5K I have an old TM MP5K, by old, I mean like 7years+ old. Anyways, I had to clean out the gun and re-lube everything. But it doesn't work. The motar works, because when I pull the trigger, I hear a "click" sound and at the same time I feel a little jump coming from the motar. I've checked all the gears and everything seems to be fine, the gears spin when I push it, but it won't spin when I stick the motor in. Any ideas? I've spent several nights trying to get it to work, I've had 2 of my friends look at it and we can't seem to figure out whats wrong with it.

June 25th, 2006, 09:55	#2
Ghost Snake Trader rating Join Date: Apr 2005 Location: Edmonton	While it may seem stupid, make sure the battery is connected the right way. One time I connected the battery wrong (reversed polarity) on my G36, and it did exactly what you were describing. The motor made a little "click" sound, but nothing else. __________________

June 27th, 2006, 03:23	#15
JohnnyDo Trader rating Join Date: Apr 2005 Location: Calgary, AB	you may want to consider getting a new tappet plate as well just in case a crack developed in it while your nozzel broke. They are cheap enough and since your mech box is apart it's worht while to do it all at the same time. __________________ Monthly Group Orders -=Gun Smithing=- -=Upgrades=- -=Parts=- -=Accessories=- Click Here To Read & Leave Feedback

June 25th, 2006, 15:27	#3
odp Trader rating Join Date: Sep 2002 Location: Vancouver	Try the motor outside the mechbox to see if the battery will power the motor. Also, what are the teeth on the pinion gear like? What spring is it running?

June 25th, 2006, 16:48	#4
OfficerChan Trader rating Join Date: May 2006 Location: BC	The motor spins when its out of the mechbox and I also looked at all the gears, everything seems to be fine, well, its a TM. The teeth on the piston is fine also. Everything SEEMS fine, I have no idea what kind of spring its running, its used and the owner doesn't remember what he did to it.

June 25th, 2006, 17:11	#5
BC_K Banned Trader rating Join Date: Mar 2004	Message this guy, he can help ya. I've had him work on my MP5K before. http://www.airsoftcanada.com/member....poster&t=27593

June 25th, 2006, 17:52	#6
Mantelope Scotty aka harleyb Trader rating Join Date: Mar 2004 Location: Toronto, Ontario	Maybe you put the motor in backwards? I'd say at least 50% of these problems are from the motor going in the wrong way around.

June 25th, 2006, 18:52	#7
OfficerChan Trader rating Join Date: May 2006 Location: BC	But the motor only goes in one way, the gear pointing up. Unless the motor is left and right side specific, which i don't think so, since it just spins, it doesn't matter whether you have it left or right.

June 25th, 2006, 19:39	#9
Droc Guest Trader rating	i had a problem with my MP5K, with the wiring backwards. would blow a fuse and gun wouldnt cycle simply because it was running against the anti-reversal latch.

June 26th, 2006, 00:32	#11
OfficerChan Trader rating Join Date: May 2006 Location: BC	Ghost Snake got it, I did reverse the wiring, I guess re-assembling a mechbox in the middle of the night doesn't help. Man, I can't believe I over looked the wiring like that. Thanks a lot guys. But now I have another problem, once I switched the wires, the gun fired, and it shot out the air nozzle, which broke around the part where it attaches to the tappet plate. I'm wondering, can I just glue the air nozzle and the tappet plate together? Because I'm thinking of ordering a new air nozzle from ASA, but I hate waiting.

June 26th, 2006, 00:44	#12
porry Banned Trader rating Join Date: Mar 2004 Location: outside Edmonton	i wouldnt recommend gluing. Buy a new airnozzle. Your tappet plate broke too? well get one of those. The glue may not provide a perfect seal

June 27th, 2006, 03:09	#14
OfficerChan Trader rating Join Date: May 2006 Location: BC	Yeah, I decided to just buy a new nozzle, no point repairing the gun again when things break. Can't cheap out on guns. THanks guys.

Old MP5K

Doctor's Corner