|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 26th, 2015, 14:17
|
#1 |
|
Spring bending when inserted?
Hey,
I just did a spring change on my G&G CM16. The stock spring rested perfectly straight in the gearbox. I put in a weaker spring but when I put it in, it was slightly bendy (curved up a bit) instead of straight like the stock. Is this a problem? Or is this simply because it's a weaker spring? Thanks! |
|
|
|
October 26th, 2015, 15:48
|
#2 | |
|
These threads of yours are what went through my head when I did my change
 I'll quote what I found before: Quote:
__________________
"...However, if preserving the integrity of the gun was the only factor at play then clearly the best option would be to run a 0.0v Lipo and run around shouting 'bang'." |
||
|
|
|
|
October 26th, 2015, 16:40
|
#3 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
That's what the spring guide is for. It's normal.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
