Mag feeding issues g&p

[Chairs]

Hey guys went out and played my first game here and was a blast. Except mags I bough only seem to be half feeding before they would stop. G&P M4/M16 130rd Ball Ball Mid-Cap AEG are what I bought and using them in a ics cxp L. Mags fit in the rifle perfectly and don't have any wobble and all 4 mags do the exact same thing. Did I buy something not meant for my rifle? If so what should I get instead? I heard MAG are good but haven't found a single one in stock.

[lurkingknight]

fill a mag and hold it right side up in a bag or clean container... hit the release and see how fast they leave the mag.

If they dribble out, try a different brand of bb.

If they spray out really fast, it's a feeding issue farther up the line like in the tube itself, the hopup or the nozzle/bucking combo.

[Chairs]

seem to be spraying out with zero issue. One mag follower had a gasket come loose and jammed up everything when first loaded it. Gonna take it out this evening and give it a try again

[lurkingknight]

the follower doesn't have a gasket on it... it probably came from the loader, there's an o ring on the inside of the lip that inserts into the mag. The ring is meant to keep BBs in the loader but it's pretty useless as it ends up in the mag more often than not.


Even though the mag fits well, have did you try pushing/pulling tilting the mag in the magwell as you shot?