tsc bolt carrier

[syrus]

I just got a tsc bolt carrier yesterday for my we scar. It wss half the price of ra-tech super bolt for my we scar. When i pulled it out of the package i was annoyed. There was huge machine marks all around where the gas nozzle goes and gross amount of brown goop which i hope had something to do with the machining process inside. After spending a lot of time cleaning all that crap out, i went to put the thing together. The stock pin for the return spring went in fine by itself but when i tried to put the nozzle in the pin goes half way and jams on the spring. The best i can tell is the pin hole is out just a hair and keeps jamming on the spring loop (which is deformed after the first try). Never had this before with my stock bolt. Now i tried sending an email to tsc to see about getting this problem fixed but the website they provide is non existent. Before i buy anything i usually try to review as much as i can but there is little information on tsc... any help or ideas would be great. As it stands i don't think I'll ever buy tsc again. Atleast with ra-tech you can get a hold of them.

[uncle_benny12]

I was under the impression that they are no longer in business, I don't recall seeing any new products in a long time now.

[syrus]

Crap must have been an old bolt carrier then......

[audi_bhoy]

You may try to but the Bolt front end up, so the spring might go deeper in the bolt just by gravity. I do that with my KJW M4 bolts and it's saving me lots of PITA, especially since OEM nozzle springs tend to break, and I have to rebend a new end from the existing spring, shortening it by the same process...

[N_Force]

TSC parts mostly are way off spec and also really rough finishing. Need to have heavy modify to make it smooth and works. If I have choices, I wouldn't use it.