Dual Sector Gear semi not working

mr.jk · September 30th, 2014, 19:28

Hi guys!

I'm having an issue with my DSG build. Worked fine before and now semi doesn't work. Here is a link. http://youtu.be/6or6OeRPK6Q Any suggestions to what might have caused this problem?
EDIT: I would fire in full auto and it works. Once I switch to semi its like the motor has a hard time pulling the spring.

Parts List:

VFC Gearbox shell
SHS Trigger mechanism
SHS Piston(swiss cheesed)
Lonex piston head
Stock Cylinder
Stock Nozzle
Stock Tappet plate (cut for DSG)
Siegtek DSG 10.44 Gearset
M120
Siegtek Spring spacer
D6 Lab mosfet with active brake
JG Blue motor
11.1v 25c Nano-tech

Thanks!

lurkingknight · October 1st, 2014, 14:58

what is your full battery specification?

Why are you using a 120 spring? do you like getting 250 fps?

I'm thinking it's possible you need more battery amp output, but a 120 spring should be easy enough to pull.

What method did you use to shim?

pestobanana · October 2nd, 2014, 00:23

Problem is your cutoff lever. It is being held in the wrong position due to the enlarged shape of the Siegetek cutoff cam, your trigger sled slips over the contacts and releases instead of going into the contacts.

Solution is to use a different cutoff lever, or mod the one you already have to work.

M120 isn't THAT bad. I got around 350 with an unspacered M160 just from a good air seal.

pestobanana · October 2nd, 2014, 00:38

Also, you may want to be concerned about your low RoF, something doesn't seem right. It sounds like its in the mid 30's, which is extremely low for a DSG in the setup you listed. You should be expecting 45+ RPS, even with that tiny battery. I have a SSG setup that does 46 RPS with that battery so....

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 30th, 2014, 19:28	#1
mr.jk Trader rating Join Date: May 2013 Location: Mississauga	Dual Sector Gear semi not working Hi guys! I'm having an issue with my DSG build. Worked fine before and now semi doesn't work. Here is a link. http://youtu.be/6or6OeRPK6Q Any suggestions to what might have caused this problem? EDIT: I would fire in full auto and it works. Once I switch to semi its like the motor has a hard time pulling the spring. Parts List: VFC Gearbox shell SHS Trigger mechanism SHS Piston(swiss cheesed) Lonex piston head Stock Cylinder Stock Nozzle Stock Tappet plate (cut for DSG) Siegtek DSG 10.44 Gearset M120 Siegtek Spring spacer D6 Lab mosfet with active brake JG Blue motor 11.1v 25c Nano-tech Thanks! Last edited by mr.jk; September 30th, 2014 at 20:12..

October 1st, 2014, 14:58	#2
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	what is your full battery specification? Why are you using a 120 spring? do you like getting 250 fps? I'm thinking it's possible you need more battery amp output, but a 120 spring should be easy enough to pull. What method did you use to shim? __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. Last edited by lurkingknight; October 1st, 2014 at 15:01..

October 2nd, 2014, 00:23	#3
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	Problem is your cutoff lever. It is being held in the wrong position due to the enlarged shape of the Siegetek cutoff cam, your trigger sled slips over the contacts and releases instead of going into the contacts. Solution is to use a different cutoff lever, or mod the one you already have to work. M120 isn't THAT bad. I got around 350 with an unspacered M160 just from a good air seal.

October 2nd, 2014, 00:38	#4
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	Also, you may want to be concerned about your low RoF, something doesn't seem right. It sounds like its in the mid 30's, which is extremely low for a DSG in the setup you listed. You should be expecting 45+ RPS, even with that tiny battery. I have a SSG setup that does 46 RPS with that battery so....

Dual Sector Gear semi not working

Doctor's Corner