|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 19th, 2013, 22:33
|
#1 |
|
First parts to buy.
So its time to upgrade I have a King Arms M4 series and I am just wondering what should I start with? Just looking for advice. Thanks
|
|
|
|
February 19th, 2013, 22:34
|
#2 |
|
Internal or External?
Externally, do whatever the fuck you feel like doing. Magpul ALL the things if you want to. Put on a free float handguard, turn it into a SOPMOD if you want, etc. The possibilities are endless. Internally, run it til something breaks. At most Guarder Black bucking and barrel upgrade. Coincidentally, if you want a 20" one piece barrel for a DMR project or something check the classifieds, I'm going to post something up in the next hour or so.
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE Last edited by L473ncy; February 19th, 2013 at 22:37.. |
|
|
|
|
February 19th, 2013, 23:15
|
#3 |
|
The ka m4 is a pretty good base to start from. I have one and completely changed everything except the body and barrel. Otherwise it's a totally different rifle.
__________________
Como estas bitches.... |
|
|
|
|
February 20th, 2013, 00:34
|
#4 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
hopup rubber, PDI-W, firefly, or Rhop
Barrel (up to 430mm, anything beyond that is a waste) 380fps spring use .28g BBs Then get a gundoc to shim the gears and fix any compression leaks in the mechbox |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
