How Do you install a mock silencer on a standard G36c?

JerryMcGoulBerry · July 1st, 2012, 15:07

What kind of silencer would I need? im guessing a 14mm. and how would it fir on the barrel?

Styrak · July 1st, 2012, 15:16

Screws on, just like every other AEG.

AngelusNex · July 1st, 2012, 18:01

either need a small barrel extender or get one of those pistol suppressors with the built in extender bit.

kalnaren · July 2nd, 2012, 09:58

Shouldn't need an extender.

1) Remove the set screw holding on the flashider.
2) Remove the flashider
3) Screw on suppressor.

Basic-Wedge · July 2nd, 2012, 15:51

It may depend on the brand of G36C in question, but you probably will need some sort of extender to get enough clearance from the handguard. At least, I needed one for my Ares G36C. Actually, I used a short thread adapter. My Ares, and many other G36s come with 14mm+ threads, while most suppressors come with 14mm- threads. Just get a short + to - thread adapter, and you'll be good to go.

Armyissue · July 3rd, 2012, 12:39

a mock silencer on a heckler, are you punny?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 1st, 2012, 15:07	#1
JerryMcGoulBerry Trader rating Join Date: May 2012 Location: Calgary Alberta	How Do you install a mock silencer on a standard G36c? What kind of silencer would I need? im guessing a 14mm. and how would it fir on the barrel?

July 1st, 2012, 15:16	#2
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Screws on, just like every other AEG. __________________ Airsoft Sales and Repair/Upgrade Services

July 2nd, 2012, 15:51	#5
Basic-Wedge Trader rating Join Date: Mar 2010	It may depend on the brand of G36C in question, but you probably will need some sort of extender to get enough clearance from the handguard. At least, I needed one for my Ares G36C. Actually, I used a short thread adapter. My Ares, and many other G36s come with 14mm+ threads, while most suppressors come with 14mm- threads. Just get a short + to - thread adapter, and you'll be good to go. __________________ * * * * * * * * * Rob Bye

July 1st, 2012, 18:01	#3
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	either need a small barrel extender or get one of those pistol suppressors with the built in extender bit.

July 3rd, 2012, 12:39	#6
Armyissue Administrator of Pants Trader rating Join Date: Sep 2004 Location: Port Credit	a mock silencer on a heckler, are you punny? __________________ *** * * * * * * * F i n d - a n - A g e - V e r i f i e r * * * * * * ***

How Do you install a mock silencer on a standard G36c?

Newbie Tank