Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Double feeding

:

Doctor's Corner

Reply
 
Thread Tools
Old June 20th, 2011, 23:42   #1
Beeny
 
Join Date: Mar 2011
Double feeding

G&G M4 max double feeding...

Gearbox was never taken apart...
Upper/lower receiver were taken appart tho...

Dont know if the barrel was taken out of the hopup unit since its not my gun...

There is no double feeds on semi...only on full auto...
Anyways my main questions was :
Can mag cause double feeds?

The gun belongs to my friends but the mag is mine :P
That why im asking i have 4 other mags just like this one and they work just fine...

Last edited by Beeny; June 21st, 2011 at 00:04..
Beeny is offline   Reply With Quote
Old June 21st, 2011, 00:04   #2
VooDooPeteK
 
VooDooPeteK's Avatar
 
Join Date: Feb 2010
Location: Thorold, Ont
Yes mags can cause double feeding. I assume you are using the highcap that came with the gun?

I would suggest getting some madcaps if that's he case as that might be all you need to correct your issue
VooDooPeteK is offline   Reply With Quote
Old June 21st, 2011, 00:08   #3
Beeny
 
Join Date: Mar 2011
No they didnt come with the gun...the one that came with the gun broke..so i bougth 5 JG Hicap mags...I lent it to a guy i play with cuz his mag broke (till he gets new one)
He still has my mag but when he shoots there is always double feeds (only on fullauto).<

Could it be hopup issue aswell?

Im trying to figure out what the problem is..i need to try the mag in my own gun also...
Beeny is offline   Reply With Quote
Old June 21st, 2011, 11:17   #4
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Double feeding is generally associated with the barrel/hop up unit mating. If the barrel retainer clip is cracked, the barrel can slip forward a bit, allowing two BBs to enter instead of one.
CDN_Stalker is offline   Reply With Quote
Old June 30th, 2011, 11:27   #5
bluddpact
 
Join Date: Jun 2011
Location: Philippines
also it is possible that the hop rubber's mouth (where the BBs been fed) was worn out which creates a double feeding. that hop rubber mouth serves as a stopper for the BB to feed one at a time during full-auto mode. if this is the case, you will have to change your hop rubber.
bluddpact is offline   Reply With Quote
Old June 30th, 2011, 13:29   #6
iKliiu
 
Join Date: Aug 2010
What battery are you using? Sometimes double feeding is caused by overspin.
iKliiu is offline   Reply With Quote
Old June 30th, 2011, 15:49   #7
Ninja_En_Short
 
Ninja_En_Short's Avatar
 
Join Date: Jul 2007
Location: France, Canada (Montréal)
Send a message via MSN to Ninja_En_Short
Rack, check chamb... oh no it's not RS

Basically the same thing as the ones before but you can also check if the nozzle moves properly : if dirt are crap like that between nozzle and axis it can give enough time for 2 or more BBs to get in the way.
My record was four at the same time... not on my gun.
__________________
Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes...
I can do a CTRL+ATL+DEL on your gun !

Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring)
Heavy custom builder (including painting)


Last edited by Ninja_En_Short; July 1st, 2011 at 02:45..
Ninja_En_Short is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 13:21.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.