|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 14th, 2010, 14:56
|
#1 |
|
Wiring supplies
Look for the quick disconnects to attach the wiring to the motor anyone know of a good website?
|
|
|
|
December 14th, 2010, 15:02
|
#2 |
|
canadian tire automotive section.
|
|
|
|
|
December 14th, 2010, 15:07
|
#3 |
|
Official ASC Bladesmith
|
Yup, small red connectors as stated above. Crimp, maybe a bead of solder on the wire end, slice off the red insulator, cover with heat shrink, heat then bend 90 degrees while still warm, done. If you don't cut the insualtion off you might find seating issues when you put the motor plate back on.
|
|
|
|
|
December 14th, 2010, 15:21
|
#4 |
 A Total Bastard
|
Canadian Tire automotive section, they have just the size you need for small female disconects.
__________________
W1-5 |
|
|
|
|
December 14th, 2010, 16:40
|
#5 |
|
|
awesome thanks guys
|
|
|
|
|
December 14th, 2010, 17:28
|
#6 |
|
I'm gonna cry I've been looking for them for a week and I didn't find some at CT... ended up soldering the wire to the corpse of the connector to get the AEG working...
__________________
Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting) 
|
|
|
|
|
December 14th, 2010, 18:15
|
#7 |
|
Official ASC Bladesmith
|
Feces occurs.......... had to do that a couple times myself, more since the tabs on the motors had busted off.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
