Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Problem with my tornado grenade.

:

Doctor's Corner

Reply
 
Thread Tools
Old November 29th, 2010, 16:09   #1
philster911
 
philster911's Avatar
 
Join Date: Sep 2008
Location: Trois-Rivieres City, QC
Problem with my tornado grenade.

I dont know if i'm in the good section since it aint a gun, but anyway, here is my problem:
I bought a used tornado grenade off someone, and when i came to test it, i filled it with gas, putted BBs in it, and when i removed the pin and threw it, nothing happened. It took at least 10-15 seconds before the grenade blew, and it didnt blow a lot. Is it because i didnt put enough gas? I know there is a technique to reduce explosion timing, but is the default explosion timing THAT MUCH long? And also, what is the instructions for the maintenance?
__________________
Q.P.M.T
Quebec Private Mercenaries Team.
-Ingénieur.

philster911 is offline   Reply With Quote
Old November 29th, 2010, 16:10   #2
Spike
Privateer Airsoft
 
Spike's Avatar
 
Join Date: Dec 2008
Location: Beaverbank, NS
Sounds like you didn't gas it up enough. I have to put a TON of gas into mine before I get a reliable timer.
__________________
I change primaries like other people change socks.
Spike is offline   Reply With Quote
Old November 29th, 2010, 16:39   #3
philster911
 
philster911's Avatar
 
Join Date: Sep 2008
Location: Trois-Rivieres City, QC
I disassembled it, cleaned it, and i'll try it again tonight. Lets hope it works this time!
__________________
Q.P.M.T
Quebec Private Mercenaries Team.
-Ingénieur.

philster911 is offline   Reply With Quote
Old November 29th, 2010, 16:57   #4
-Trooper-
a.k.a. Egria
 
-Trooper-'s Avatar
 
Join Date: Jul 2005
Location: Vancouver
Also make sure that your propane tank isn't empty.
__________________


PURVEYOR OF FINE PARACORD PRODUCTS

www.beaconconceptsco.com

Click Here For ASC Thread

Team GHOSTS - G86
-Trooper- is offline   Reply With Quote
Old November 29th, 2010, 16:57   #5
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Are you letting it sit for a few minutes after filling? Filling it makes it cold for a little while, which affects the timer. However even right after a fill it should "explode" somewhat.
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old November 29th, 2010, 17:13   #6
Daiviet
Captain Sunshine
 
Daiviet's Avatar
 
Join Date: Aug 2006
temperature affects it as well. were you testing it outdoors or indoors?
Daiviet is offline   Reply With Quote
Old November 29th, 2010, 17:16   #7
philster911
 
philster911's Avatar
 
Join Date: Sep 2008
Location: Trois-Rivieres City, QC
I was testing the grenade indoor, and i let it sit a 2-3 minutes. The propane tank was brand new, and it wasnt cold, it maybe was because it wasnt filling it enough, i filled it for a 6-7 seconds and after that propane was spilling off tje valve.. I'll try it again tonight.
__________________
Q.P.M.T
Quebec Private Mercenaries Team.
-Ingénieur.

philster911 is offline   Reply With Quote
Old November 29th, 2010, 17:18   #8
Brian McIlmoyle
8=======D
 
Brian McIlmoyle's Avatar
 
Join Date: Apr 2005
Location: Toronto
Lubrication.. do you have Grenade oil?

without lubrication the delay is unpredictable and long..

you need to lube the grenade with every reset for best results.

Also make certain you give it a full gas charge.. the valve will back blast when it is full
__________________
Brian McIlmoyle
TTAC3 Director
CAPS Range Officer
Toronto Downtown Age Verifier

OPERATION WOODSMAN

If the tongue could cut as the sword does, the dead would be infinite
Brian McIlmoyle is offline   Reply With Quote
Old November 29th, 2010, 17:21   #9
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
Does it leak after being gassed?
__________________
Gunny_McSmith is offline   Reply With Quote
Old November 29th, 2010, 17:26   #10
sarosh
 
sarosh's Avatar
 
Join Date: Jun 2009
Location: St. Catharines Ontario
make sure you have the end cap on with the center peice so theres no hole in the middle.
sarosh is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 12:55.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.