lipo battery?

BeAcH · June 26th, 2010, 13:58

Hey,

Quick question,

Just picked up a lipo battery and it has different style connector on the end, i need to switch it to a deans style end. Just want to make sure that i can go ahead and switch the end without doing anything specific to the battery pack.

Cutting the positive first or the negative...

Any tips would be appreciated.

Cheers

tunabreath · June 26th, 2010, 15:29

The positive is generally more difficult to solder if you have the negative done first, so do the positive end first.

ThunderCactus · June 27th, 2010, 01:07

Do one wire at a time and just make sure you don't arc the leads. But if you REALLY wanna be on the safe side, solder it close to your outside door and leave the door open lol
But don't worry, LiPo's don't go up very quickly, you should have ample time to grab it with a pair of pliers, run through your house and throw it out the door before any flaming occurs!

BeAcH · June 27th, 2010, 02:04

Yeah Tcactus thats exactly what i did....worked pretty good, lets see how long it takes to break a stock A&K m249 saw mechbox using a lipo battery..lol

Then i can start building a new one for it.

Spike · June 27th, 2010, 02:11

It'll break as soon as you have a clear shot of ten guys in a line

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 26th, 2010, 13:58	#1
BeAcH Trader rating Join Date: Jun 2008 Location: Fort Saint John BC	lipo battery? Hey, Quick question, Just picked up a lipo battery and it has different style connector on the end, i need to switch it to a deans style end. Just want to make sure that i can go ahead and switch the end without doing anything specific to the battery pack. Cutting the positive first or the negative... Any tips would be appreciated. Cheers __________________ Live for nothing, or die for something They can have my rifle when they can pry it from my dead cold fingers

June 26th, 2010, 15:29	#2
tunabreath Trader rating Join Date: Dec 2005 Location: Edmonton, AB	The positive is generally more difficult to solder if you have the negative done first, so do the positive end first. __________________ Vita, Passione e Pistole

June 27th, 2010, 02:04	#4
BeAcH Trader rating Join Date: Jun 2008 Location: Fort Saint John BC	Yeah Tcactus thats exactly what i did....worked pretty good, lets see how long it takes to break a stock A&K m249 saw mechbox using a lipo battery..lol Then i can start building a new one for it. __________________ Live for nothing, or die for something They can have my rifle when they can pry it from my dead cold fingers

June 27th, 2010, 01:07	#3
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Do one wire at a time and just make sure you don't arc the leads. But if you REALLY wanna be on the safe side, solder it close to your outside door and leave the door open lol But don't worry, LiPo's don't go up very quickly, you should have ample time to grab it with a pair of pliers, run through your house and throw it out the door before any flaming occurs!

June 27th, 2010, 02:11	#5
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	It'll break as soon as you have a clear shot of ten guys in a line __________________ I change primaries like other people change socks.

lipo battery?

Upgrades & Modifications