VSR cocking problem.

[ryan1796]

Hi fellow airsofters,

I bought a M700(VSR clone) and I did some of a re-lubrications after I recieve the gun. But the problem is, it's really hard to cock and even harder to cock back in(I'm not a weak small guy..).

Here are the lists of upgrade;

Mad bull 6.03 tightbore barrel
Laylax PSS10 SP150 spring
Laylax PSS10 Spring Guide w/bearing
Laylax PSS10 High Pressure Piston w/ Silent Shaft
Laylax PSS10 Cylinder Head
Daiki VSR-10 Second Sear
Daiki VSR-10 Cylinder Release Lever

After I touched the gun it caused a problem. I don't think I made a mistake during reassembling nor re-lubricating.

But I want to ask you guys about the proper lubrication and any advise.

Thanks for your time.

[Rugger_can]

when you say lubrication what exactly are you using?

[ryan1796]

Originally Posted by Rugger_can

when you say lubrication what exactly are you using?

I was using a grease and silicon oil.

[Treefingers]

I'd take it apart and look for scratches or wear marks, cuz if something is causing resistance, it's probably getting damaged. Even if to just take it apart and re-assemble it carefully to see if it still happens.

[ryan1796]

Originally Posted by Treefingers

I'd take it apart and look for scratches or wear marks, cuz if something is causing resistance, it's probably getting damaged. Even if to just take it apart and re-assemble it carefully to see if it still happens.

I looked at it carefully but I wasn't able to find any mojor damage.
Maybe I have to wash every parts and re-assemble it again.

Can anyone teach me where to grease and spray silcon oil?

[Amos]

You're using a Laylax 150 spring with a laylax piston.. and you're still working on the 45* system.. you need a V, M, or whatever the laylax trigger is to change over to a 90* sear system...

there's your problem.

Hope these pics work;

45*




90*

[ryan1796]

other than a trigger set, what does the sorbo pad do?
I'm thinking of get rid them off if they are not necessary.

[Amos]

Sorbo pad will quiet things down and absorb the impact of the piston. It doesn't effect cocking at all.

[ryan1796]

Originally Posted by Amos

Sorbo pad will quiet things down and absorb the impact of the piston. It doesn't effect cocking at all.

I just wash every parts and re-lubricated and it work better than yesterday.
But seems I still need a trigger set as you told me and they are all sold out at this moment...haha