Many TM Hicapa 5.1 problems, need help!

philster911 · April 11th, 2010, 18:56

Today i broke my double safety lever on my TM hi capa by trying to remove it, where could i get one? And i need a new piston head, because my gun leaks as hell and cannot shoot 5 bullets before spreading gas from everywhere. Where could i buy these two parts? And by the way, my hammer doesnt stay cocked anymore. Anyone has a clue why?

jamuke · April 11th, 2010, 19:07

Tokyo Model Company has quite a few stock Marui items, otherwise you can buy upgrade parts at almost any HK retailer.

Spewing gas does not sound indicative of the piston head but without more info it's hard to tell.

If your hammer doesn't cock anymore..is that before or after you took the pistol apart? You may have replaced the 3 prong spring incorrectly or....well more info helps

Gunny_McSmith · April 11th, 2010, 19:38

how could you break the safety lever when removing it?

btw...those cost around 30-50$ +shipping ...(when you buy oversea....)
and in canada they can go for 100$...

BTW: it is recommended to be knowing what you do before opening/upgrading any of your airsoft guns....

CDN_Stalker · April 11th, 2010, 19:41

Gas spewing from the gun is likely a lube issue, put some oil on all the parts associated with the firing mechanism (like the hammer pivot point, valve knocker, etc.)

If your mags themselves leak, tighten the screw on the base of the magazine, this is a typical thing with Hi-Capas.

philster911 · April 11th, 2010, 19:57

No mag leaking, fixed with blue silicone, My hammer is now cocking again, but i've got another problem: When i press the trigger, nothing happens, i need to press 3 or 4 times the trigger and then the hammer will decock. Someone knows why? Yes the hammer wasnt cocking because i misplaced the 3 prong spring, i replaced it and now it's okay. Yeah i broke the safety lever because it was already weak, and i just tried to remove it, and broke it. I'm a noob with that gun, i got it yesterday.

Gunny_McSmith · April 11th, 2010, 20:16

did you place the leafspring correctly?

jamuke · April 11th, 2010, 20:19

sounds like your internals are mis-aligned

Shirley · April 11th, 2010, 22:44

You installed the middle prong on the leaf spring wrong. It needs to be over the sear, not under.

Left and right can be found stock as above. OR you can buy STAINLESS STEEL ones from Illusion Kinetics for over $100. They are nice upgrades too.

New piston head? Get one from Illusion Kinetics again, there are alot of upgrades.
Don't forget to use silicone oil.

philster911 · April 11th, 2010, 22:47

Problem solved for the trigger, now i need to know why i can shoot only 5 bullet before lacking of gas. Could it be due to the fact that i dont have any o-ring on the piston head?

jamuke · April 11th, 2010, 22:54

O-rings, werever you find them on your pistol,mags or anything else is not optional and need to be in good shape and lubricated to work correctly.

they usually provide a seal for something or other and without one I can't imagine anything working properly for you

tac up a pic of everything and we'll tell you why it's not working

Shirley · April 11th, 2010, 23:23

Quote:

Originally Posted by philster911

Problem solved for the trigger, now i need to know why i can shoot only 5 bullet before lacking of gas. Could it be due to the fact that i dont have any o-ring on the piston head?

O-rings of the piston head needs to be lubed.

Temperature of the room can affect gas.

Maybe you're out of gas?

the_red · April 11th, 2010, 23:38

philster TM dont have any o-ring on the piston head ...

What could be his problem ?(philster is a friend)

Shirley · April 11th, 2010, 23:42

If you don't have an O-ring on the piston head, then that is your problem. Might as well buy a new piston head. OR go to a hardware store and find on that fits..

philster911 · April 11th, 2010, 23:45

I'll take a picture tomorrow.

Daiviet · April 12th, 2010, 00:03

Quote:

Originally Posted by Mr.Hitman

If you don't have an O-ring on the piston head, then that is your problem. Might as well buy a new piston head. OR go to a hardware store and find on that fits..

If it's a stock hi capa though, it doesn't use normal o-rings. It uses a proprietary cup piston head instead.

so either OP is saying it doesn't have an o-ring, because technically it's true, it uses something else.

Or, the cup piston head is missing. At that point he has a choice of purchasing a new stock one, or upgrading to a better piston head. The latter is better than the former.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 11th, 2010, 18:56	#1
philster911 Trader rating Join Date: Sep 2008 Location: Trois-Rivieres City, QC	Many TM Hicapa 5.1 problems, need help! Today i broke my double safety lever on my TM hi capa by trying to remove it, where could i get one? And i need a new piston head, because my gun leaks as hell and cannot shoot 5 bullets before spreading gas from everywhere. Where could i buy these two parts? And by the way, my hammer doesnt stay cocked anymore. Anyone has a clue why? __________________ Q.P.M.T Quebec Private Mercenaries Team. -Ingénieur.

April 11th, 2010, 19:07	#2
jamuke Trader rating Join Date: Dec 2008 Location: Trono	Tokyo Model Company has quite a few stock Marui items, otherwise you can buy upgrade parts at almost any HK retailer. Spewing gas does not sound indicative of the piston head but without more info it's hard to tell. If your hammer doesn't cock anymore..is that before or after you took the pistol apart? You may have replaced the 3 prong spring incorrectly or....well more info helps __________________

April 11th, 2010, 19:38	#3
Gunny_McSmith a.k.a. Palucol Trader rating Join Date: Mar 2008 Location: MTL	how could you break the safety lever when removing it? btw...those cost around 30-50$ +shipping ...(when you buy oversea....) and in canada they can go for 100$... BTW: it is recommended to be knowing what you do before opening/upgrading any of your airsoft guns.... __________________ Last edited by Gunny_McSmith; April 11th, 2010 at 19:40..

April 11th, 2010, 19:41	#4
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Gas spewing from the gun is likely a lube issue, put some oil on all the parts associated with the firing mechanism (like the hammer pivot point, valve knocker, etc.) If your mags themselves leak, tighten the screw on the base of the magazine, this is a typical thing with Hi-Capas. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

April 11th, 2010, 19:57	#5
philster911 Trader rating Join Date: Sep 2008 Location: Trois-Rivieres City, QC	No mag leaking, fixed with blue silicone, My hammer is now cocking again, but i've got another problem: When i press the trigger, nothing happens, i need to press 3 or 4 times the trigger and then the hammer will decock. Someone knows why? Yes the hammer wasnt cocking because i misplaced the 3 prong spring, i replaced it and now it's okay. Yeah i broke the safety lever because it was already weak, and i just tried to remove it, and broke it. I'm a noob with that gun, i got it yesterday. __________________ Q.P.M.T Quebec Private Mercenaries Team. -Ingénieur.

April 11th, 2010, 20:16	#6
Gunny_McSmith a.k.a. Palucol Trader rating Join Date: Mar 2008 Location: MTL	did you place the leafspring correctly? __________________

April 11th, 2010, 20:19	#7
jamuke Trader rating Join Date: Dec 2008 Location: Trono	sounds like your internals are mis-aligned __________________

April 11th, 2010, 22:44	#8
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	You installed the middle prong on the leaf spring wrong. It needs to be over the sear, not under. Left and right can be found stock as above. OR you can buy STAINLESS STEEL ones from Illusion Kinetics for over $100. They are nice upgrades too. New piston head? Get one from Illusion Kinetics again, there are alot of upgrades. Don't forget to use silicone oil. __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

April 11th, 2010, 22:47	#9
philster911 Trader rating Join Date: Sep 2008 Location: Trois-Rivieres City, QC	Problem solved for the trigger, now i need to know why i can shoot only 5 bullet before lacking of gas. Could it be due to the fact that i dont have any o-ring on the piston head? __________________ Q.P.M.T Quebec Private Mercenaries Team. -Ingénieur.

April 11th, 2010, 22:54	#10
jamuke Trader rating Join Date: Dec 2008 Location: Trono	O-rings, werever you find them on your pistol,mags or anything else is not optional and need to be in good shape and lubricated to work correctly. they usually provide a seal for something or other and without one I can't imagine anything working properly for you tac up a pic of everything and we'll tell you why it's not working __________________

April 11th, 2010, 23:38	#12
the_red Trader rating Join Date: Oct 2009	philster TM dont have any o-ring on the piston head ... What could be his problem ?(philster is a friend) Last edited by the_red; April 11th, 2010 at 23:43..

April 11th, 2010, 23:42	#13
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	If you don't have an O-ring on the piston head, then that is your problem. Might as well buy a new piston head. OR go to a hardware store and find on that fits.. __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

April 11th, 2010, 23:45	#14
philster911 Trader rating Join Date: Sep 2008 Location: Trois-Rivieres City, QC	I'll take a picture tomorrow. __________________ Q.P.M.T Quebec Private Mercenaries Team. -Ingénieur.

Many TM Hicapa 5.1 problems, need help!

Doctor's Corner