Hop up problem.. Pls help

[illusive6296]

I have a G&G M4 and all was fine until today. It wont fire anymore bbs when I have a mag in. However, it does fire a single bb when I placed it in the chamber, with the gun upside down, which leave me to believe its something to do with the hop up. When it was working properly, 4 bbs used to come out of the well when I eject the mag. Now a total of 5 bbs come out when I eject the mag. The hop up housing has a small circular hole that a cycled bb sits on. Is there supposed to be something there? because the bbs doesn't line up with the hopup chamber.

This crued diagram show what I observed. Not sure if this is normal, hopefully someone have come across this before. The air nozzle is centred between two bb's, where the first bb is seated in the hole, represented in red.

[qpwerx]

hi there
i already have a problem like this one
1: put your hop-up to the neutral position (totaly inactive)
2: the misalignement of the bb's not sound abnormal to me but chek if your hop-up is not cracked or broke!
3: make sure that you put lubricant in your hop-up chamber and mag's
4: for me my problem was a misalignement of the hop-up whit the magazine
make sure the magazine its in place corectly !

good luck