|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 16th, 2009, 14:40 | #1 |
kos
|
PTW battery issue... ??
Okay, so, I charged them up, but they still set off the LED. What the effing hell is going on? Does the LED go off when the PTW is split, or something?
God damn! Thanks for yer help/suggestions/backrub. |
April 16th, 2009, 15:00 | #2 |
the led should blink when the batt is conected. Does the gun fire?
|
|
April 16th, 2009, 19:10 | #3 |
The LED should blink once when you have the battery connected and select a fire mode.
If it's blinking about once/second or so, than it's a a problem. Like I said, when I tested it, I ran it with the M130 and 9.6v, which is the toughest load for the PTW. Do the batteries hold a charge? The 9.6v when properly charged will sit no-load at about 10.5-11V, the stay steady at 9.6V while under load. If the battery has been stored depleted for long periods, it may take several charge/discharge cycles before they return to normal. If the battery was left connected in the gun, it may have been totally drained, and recovery may not be possible.
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
April 17th, 2009, 02:21 | #4 |
kos
|
Oh, so this is normal? It blinks once, and disappears from SAFE to SEMI.
Oh man, I feel slightly ridiculous. Also, the batteries hold a full charge. They've been left half charged since december, though. |
April 17th, 2009, 02:30 | #5 |
Sounds right.
The gun does work, right?
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
April 17th, 2009, 04:46 | #6 |
kos
|
|
|
Bookmarks |
|
|