|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
April 2nd, 2009, 21:38
|
#1 |
|
SR-16 Accuracy Problems
Hey guys
So I just got a tm Sr-16 (all internals stock) and for some reason it is shooting far too low, and off to the left. I have tried adjusting the sights, and the hop-up multiple times, but that only does so much. I am a little new to airsoft so if anyone has some suggestions that would be greatly appreciated! Thanks
__________________
|
|
|
|
|
April 2nd, 2009, 21:43
|
#2 |
|
did you buy this gun brand new or used?
What kind of bb's are you using? (brand/weight)
__________________
"I feel no emotion, just recoil." |
|
|
|
|
April 2nd, 2009, 21:44
|
#3 |
|
I bought it used from the classified section, and I am using 0.2g velocity arms premium grade bb's
__________________
|
|
|
|
|
|
April 2nd, 2009, 21:55
|
#4 |
|
Have you cleaned the inner barrel and hop-up rubber.....its amazing what a dirty barrel will do to your gun.
Does your hop up bucking work, when you turn the hop-up up does it make the bb curve upwards. How far does it shoot, 60,70,80 ft.... The more information you give us the better we can help you... Beach
__________________
Live for nothing, or die for something They can have my rifle when they can pry it from my dead cold fingers Last edited by BeAcH; April 2nd, 2009 at 21:58.. |
|
|
|
|
April 2nd, 2009, 22:01
|
#5 |
|
I agree with more information:
There was a guy on the forums not too long ago complaining about accuracy problems and how his hop wasn't working... it turned out he was in his basement shooting at a target 15 feet away.
__________________
  Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur. |
|
|
|
|
April 2nd, 2009, 22:55
|
#6 |
|
Thanks for the help guys! I am shooting at about 50ft. I followed your directions and cleaned the hop-up rubber and inner barrel, it seems to be shooting higher now, but it still shoots a few inches to the left....
__________________
|
|
|
|
|
|
April 2nd, 2009, 23:15
|
#7 |
|
use heavier BBs. for a stock gun, .25. if its upgraded, then .28s
|
|
|
|
|
April 2nd, 2009, 23:57
|
#8 |
|
Formally SwattMedic
|
also tis will sound stupid but do you have the gun slightly tilted to the left?
__________________
 "Pain is just a symptom of weakness leaving the body" -Herb Ferh |
|
|
|
|
April 3rd, 2009, 00:09
|
#9 |
|
|
if the actual hop-up rubber is not seated correctly, it will cause the bbs to drift to a specific side (or so i heard)
|
|
|
|
|
April 3rd, 2009, 00:17
|
#10 |
|
|
when you put the inner barrel and hop-up back together did you make sure it was aligned properly. Because if the barrel is not in the right place....with the notch at the end of the barrel and the hop-up bucking aligned properly than the bb will shoot either left or right. Also if its windy outside that will affect the trajectery of the bb, and a stock gun with stock hop-up rubber will shoot like that....bb's straying left or right, and welcome to V2 mechbox.
__________________
Live for nothing, or die for something They can have my rifle when they can pry it from my dead cold fingers |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
