|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 7th, 2009, 22:30
|
#1 |
|
please help me!!!! tm 4.3 problem
ok so i may have taken my tokyo marui 4.3 custom apart and i went as far as removing the slide "easy" then removing two screws in the grip and one screw that was through the bottum of the outer barrel " were the tactical rail is" into the trigger guard. this allowed me to seperate the plasric grip from the metal part of the outer barrel. when i did i was surprized at the complicated nature of refitting it together there is some metl things poken down and up in between both parts. and everytime i try to put the parts back together the hammer doesn't want to stay locked down. if anyone can help me i would truely appresiate it. thx in advanced.
|
|
|
|
|
February 7th, 2009, 22:35
|
#2 |
|
If this had any spelling/grammar, I may have understood what was asked.
|
|
|
|
|
February 7th, 2009, 22:48
|
#3 |
|
A-56 aka Mr.Hitman
|
The middle stem in the leaf spring needs to be placed back onto the sear. On top, not under, after that, your hammer will work.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
