|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 27th, 2009, 01:20 | #1 |
Shim Job?
Hey everyone, I'm still thinking about getting a tf7, but I heard that before you try upgrade it in any way, you should give its gearbox a shim job. I don't know what this means, someone want to clarify it?
__________________
"You can go a long way with a smile, but you can go a lot further with a smile and a gun." -Al Capone |
|
January 27th, 2009, 01:27 | #3 |
So, basically you clean all the grease out of the gearbox and tighten everything?
__________________
"You can go a long way with a smile, but you can go a lot further with a smile and a gun." -Al Capone |
|
January 27th, 2009, 01:42 | #4 |
http://fragcdo.com/2008/02/14/shimming-the-gears/ read this should answer your question! oh and by the way dont upgrade a tf7! stock they fire 265fps (tested) and the marui mp7 shoots 210 so the tf7 it's pre-upgraded.
__________________
member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
January 27th, 2009, 01:42 | #5 |
Good luck shimming an AEP.
|
|
January 27th, 2009, 01:46 | #6 |
everything in this little gearbox is sooooo small, when i opened mine i think i didnt even see a shim?!
__________________
member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
|
Bookmarks |
|
|