Gun that is just DEAD, cannot revive HELP

ThatIsWhat · July 21st, 2008, 22:34

Having a weird problem with my G&P M4 being completely dead. I recently installed a 170% PDI but my mechbox and gears are all reinforced. After gaming for an hour just fine, my motor won't even turn now even when i remove the mechbox. Ive cleaned all the contacts and charged the battery. How can I tell if the motor's burnt out? Its a high speed G&P M120 and I figured it could handle the 170. Wrong?

AngelusNex · July 21st, 2008, 22:36

hi speed motors are for rof, high torque motors are for stronger springs.

Qlong · July 21st, 2008, 22:47

Check fuse.

CupidStunt · July 21st, 2008, 22:48

Quote:

Originally Posted by Qlong

Check fuse.

+1

mcguyver · July 22nd, 2008, 00:31

Does the motor go "click" when you try to fire?

G&P has a rather particular procedure when you assemble them. Tightening screws in the wrong order, routing the wiring in the grip and motor position all affect the operation of this gun.

ThatIsWhat · July 22nd, 2008, 00:57

Fuse has been checked, just fine. And the tech guy at WGC told me i'd be fine throwing in the 170 without changing anything. How can I tell if the motor's burnet out cause like i said my motor won't even turn now even when i remove the mechbox.

Thanx for the quick replies

mcguyver · July 22nd, 2008, 01:01

If your motor won't turn when connected directly to the battery, then it's done.

Get a new one. EG700 is a workhorse, with a long history of being used in G&P guns (as well as Marui).

Polar Nova · July 22nd, 2008, 12:32

You may have blown the fuse. This can be caused by mixing up the wires when you connected to the motor. Make certain that red is positive and black in negative.

Azriel_Strife · July 22nd, 2008, 16:21

likely motor, I'd go with a high torque motor for sure, eg700 is a good choice.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 21st, 2008, 22:34	#1
ThatIsWhat Trader rating Join Date: Jul 2007 Location: Ottawa	Gun that is just DEAD, cannot revive HELP Having a weird problem with my G&P M4 being completely dead. I recently installed a 170% PDI but my mechbox and gears are all reinforced. After gaming for an hour just fine, my motor won't even turn now even when i remove the mechbox. Ive cleaned all the contacts and charged the battery. How can I tell if the motor's burnt out? Its a high speed G&P M120 and I figured it could handle the 170. Wrong?

July 22nd, 2008, 00:31	#5
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Does the motor go "click" when you try to fire? G&P has a rather particular procedure when you assemble them. Tightening screws in the wrong order, routing the wiring in the grip and motor position all affect the operation of this gun. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

July 22nd, 2008, 01:01	#7
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	If your motor won't turn when connected directly to the battery, then it's done. Get a new one. EG700 is a workhorse, with a long history of being used in G&P guns (as well as Marui). __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

July 21st, 2008, 22:36	#2
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	hi speed motors are for rof, high torque motors are for stronger springs.

July 21st, 2008, 22:47	#3
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	Check fuse.

July 22nd, 2008, 00:57	#6
ThatIsWhat Trader rating Join Date: Jul 2007 Location: Ottawa	Fuse has been checked, just fine. And the tech guy at WGC told me i'd be fine throwing in the 170 without changing anything. How can I tell if the motor's burnet out cause like i said my motor won't even turn now even when i remove the mechbox. Thanx for the quick replies

July 22nd, 2008, 12:32	#8
Polar Nova Trader rating Join Date: Jul 2008	You may have blown the fuse. This can be caused by mixing up the wires when you connected to the motor. Make certain that red is positive and black in negative. __________________ <>Polar Nova<>

July 22nd, 2008, 16:21	#9
Azriel_Strife Trader rating Join Date: Oct 2007 Location: Chilliwack B.C.	likely motor, I'd go with a high torque motor for sure, eg700 is a good choice. __________________

Gun that is just DEAD, cannot revive HELP

Doctor's Corner