JG416 Metal RIS

Relja · March 7th, 2008, 15:37

How would i go about securely tightening the metal RIS on the JG 416. Mine is a bit loose and i have no idea why.

Dynamo · March 7th, 2008, 16:13

thoe the JG416 looks real close to the real HK416, the RIS isnt quite the same.
on the real HK416 as in the VFC416, the RIS has a small tab that inserts into the front notch on the upper reciver which locks the RIS in and stops it from rotating.

good luck with you JG416, you are going to need to find someway of locking it in place.

Goodl2ussian · March 7th, 2008, 16:22

that was the least helpful or productive statement ever...

caboose36 · March 7th, 2008, 16:34

You have to take off the RIS rail system, and tighten the barrel nut. I had the same problem. I geussing you already know how to take the RIS system off, right?

But take off the RIS rail system off and tighten the barrel nut.

Good luck

!

dragwindsor · March 7th, 2008, 17:23

I just got my JG HK416 yesterday and I've been tryin to fix the same problem. But I can't slide the RIS off. I believe if I do, I can enlarge the upper tab with some stiff tape. I just can't slide it off.

Styrak · March 7th, 2008, 17:35

Quote:

Originally Posted by dragwindsor

I just got my JG HK416 yesterday and I've been tryin to fix the same problem. But I can't slide the RIS off. I believe if I do, I can enlarge the upper tab with some stiff tape. I just can't slide it off.

Take off the screw on the underside of the RIS off, slide the RIS off, piece of cake.

dragwindsor · March 7th, 2008, 17:47

Quote:

Originally Posted by Styrak

Take off the screw on the underside of the RIS off, slide the RIS off, piece of cake.

It's not that easy. I have to use force but I don't want to over do it

Styrak · March 7th, 2008, 17:51

Mine comes off really easily. Dunno. You have to make sure it clears the front sight block cleanly. Maybe it's getting stuck up on that?

dragwindsor · March 7th, 2008, 17:52

What would be holding it on?

Styrak · March 7th, 2008, 17:58

The one screw I told you about.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 7th, 2008, 15:37	#1
Relja Trader rating Join Date: Aug 2007 Location: Cooksville, Mississauga, Ontario	JG416 Metal RIS How would i go about securely tightening the metal RIS on the JG 416. Mine is a bit loose and i have no idea why.

March 7th, 2008, 16:13	#2
Dynamo Harvester of Noobs' Sorrow Trader rating Join Date: Oct 2003 Location: T̆͒ͥ̓̿̅̈́̐͊̿͗̐̾̃͐ͧ&#8	thoe the JG416 looks real close to the real HK416, the RIS isnt quite the same. on the real HK416 as in the VFC416, the RIS has a small tab that inserts into the front notch on the upper reciver which locks the RIS in and stops it from rotating. good luck with you JG416, you are going to need to find someway of locking it in place. __________________ Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯.

March 7th, 2008, 17:23	#5
dragwindsor Trader rating Join Date: Feb 2008 Location: Windsor, Ontario	I just got my JG HK416 yesterday and I've been tryin to fix the same problem. But I can't slide the RIS off. I believe if I do, I can enlarge the upper tab with some stiff tape. I just can't slide it off. __________________ To save the trouble of Ancorp reading it in every post: Inokatsu

March 7th, 2008, 16:22	#3
Goodl2ussian Trader rating Join Date: Oct 2007 Location: Calgary, AB	that was the least helpful or productive statement ever...

March 7th, 2008, 16:34	#4
caboose36 Trader rating Join Date: Nov 2007 Location: Winnipeg, Manitoba	You have to take off the RIS rail system, and tighten the barrel nut. I had the same problem. I geussing you already know how to take the RIS system off, right? But take off the RIS rail system off and tighten the barrel nut. Good luck !

March 7th, 2008, 17:51	#8
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Mine comes off really easily. Dunno. You have to make sure it clears the front sight block cleanly. Maybe it's getting stuck up on that? __________________ Airsoft Sales and Repair/Upgrade Services

March 7th, 2008, 17:52	#9
dragwindsor Trader rating Join Date: Feb 2008 Location: Windsor, Ontario	What would be holding it on? __________________ To save the trouble of Ancorp reading it in every post: Inokatsu

March 7th, 2008, 17:58	#10
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	The one screw I told you about. __________________ Airsoft Sales and Repair/Upgrade Services

JG416 Metal RIS

Doctor's Corner