Wood stock cracked

8thArmy · January 31st, 2008, 05:14

After a rainy day game,i found out the gun's wooden stock had this 6 cm long and .7 cm deep crack!
is there any ways to fix it at least make sure it wont crack more : (
should i drop some super glue into the crack?

TrueTGN · January 31st, 2008, 05:16

Depending on the location, you could put in some wood/carpenters glue and clamp it.

Drake · January 31st, 2008, 05:21

I'd suggest actual wood glue, not superglue, and a good clamp or vise.

Place something (piece of plywood, strip of rubber, several layers of shipping cardboard) between the clamp's surface and the wood to prevent leaving marks.

Leave it in there long enough to dry fully (follow directions that come with the glue).

And apply a wood sealant/waterproofer on the whole piece after you're done.

edit; beaten to the punch

sherlockbonez · January 31st, 2008, 09:14

Saw dust and wood glue would also work. JB weld will hold up as well. When finish, use some furniture wax to refinish th entire stock.

8thArmy · January 31st, 2008, 20:14

Much thx guys!heading to rona right now for the wood glue and proper tools : )!

namloot · February 1st, 2008, 10:07

Quote:

Originally Posted by 8thArmy

After a rainy day game,i found out the gun's wooden stock had this 6 cm long and .7 cm deep crack!

Curious, what AEG and/or wood kit did that happen to?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 31st, 2008, 05:14	#1
8thArmy Trader rating Join Date: Jan 2007 Location: Vancouver BC Canada	Wood stock cracked After a rainy day game,i found out the gun's wooden stock had this 6 cm long and .7 cm deep crack! is there any ways to fix it at least make sure it wont crack more : ( should i drop some super glue into the crack? __________________ "Вставай, проклятьем заклеймённый, Весь мир голодных и рабов!" "乌拉!"

January 31st, 2008, 05:16	#2
TrueTGN Trader rating Join Date: Aug 2006 Location: Brantford, ON	Depending on the location, you could put in some wood/carpenters glue and clamp it. __________________ www.jeepcentral.ca

January 31st, 2008, 05:21	#3
Drake E-01 Trader rating Join Date: Dec 2001 Location: Montreal, QC	I'd suggest actual wood glue, not superglue, and a good clamp or vise. Place something (piece of plywood, strip of rubber, several layers of shipping cardboard) between the clamp's surface and the wood to prevent leaving marks. Leave it in there long enough to dry fully (follow directions that come with the glue). And apply a wood sealant/waterproofer on the whole piece after you're done. edit; beaten to the punch __________________

January 31st, 2008, 09:14	#4
sherlockbonez Trader rating Join Date: Oct 2002	Saw dust and wood glue would also work. JB weld will hold up as well. When finish, use some furniture wax to refinish th entire stock. __________________ Солдаты Свободы

January 31st, 2008, 20:14	#5
8thArmy Trader rating Join Date: Jan 2007 Location: Vancouver BC Canada	Much thx guys!heading to rona right now for the wood glue and proper tools : )! __________________ "Вставай, проклятьем заклеймённый, Весь мир голодных и рабов!" "乌拉!"

Wood stock cracked

Doctor's Corner