mag slippage/accidental loss

six4 · October 5th, 2007, 07:23

soft sided pistol holsters,including dropleg platforms, have a tendency to eject the mags,most times without the user nowing about it. i may have found a way to prevent this. all you need is an old bicycle tire tube cut in the appropriate size and fit it over the magwell. see illustrations below.

it fits really tight and even when the mag is released it takes pressure to fully eject the mag by hand, so accidental loss should not happen. i will be testing this on the weekend to see if it works.

Chrios · October 6th, 2007, 14:42

I would love to hear how this turns out...I have the same problem with my pistols, especially the Mk 23. One of my mags fell a good 25 feet when I was climbing down a ladder. No lasting damage was done, fortunately, but I've been paranoid ever since about losing mags.

Renegade) · October 6th, 2007, 17:27

I got this tip from CDN Stalker.. hes been using it on his G19 for years now, I dont have the problem with my P226, but I noticed the Glock ejects the mag instanly in my Tornado Holster..

its a simple cheap idea to save your mags.

CDN_Stalker · October 6th, 2007, 20:03

Ya, my idea from two years ago (after I lost a G19 mag from my shoulder holster.......... I've told others about this idea, they often refer to it as "Stalker's Foreskin" and they love it on their Glocks).

Works for some guns, not for others. I have a larger peice of tube on my MK23 grip, but it's for grip and not to retain the mag. I've found that when the mag is fully seated it doesn't go anywhere, unless it's overfilled with BBs and doesn't seat properly.

kalnaren · October 6th, 2007, 20:30

I had this problem once with my Mk23. I found that as long as I'm careful when I put it in the holster it's fine. It sits in pretty tight and doesn't move around much so I think it's ok.

Spawn28 · October 6th, 2007, 20:35

i use electrical tape but that looks like it will work too

shifty51 · October 6th, 2007, 20:52

does the tire tube not make for a lengthy mag change?

Regan.S · October 6th, 2007, 22:44

Well now I know when I finally become age of playing that I know how to not lose pistol clips! Unfortuntaly I probably won't remember.

CDN_Stalker · October 6th, 2007, 22:58

Quote:

Originally Posted by shifty51

does the tire tube not make for a lengthy mag change?

Not in the G19 useage, but I haven't tried for Mk23 yet. Think of it this way, if you mainly use your GBB as a fast backup to your AEG for whatever reason, one mag should get you by long enough. But, if yo uplan to use your GBB for pistol only games, or CQB, then you just fold the 'foreskin' over the grip and it doesn't get in the way of changing mags at all.

Regarding the MK23, I recently got a Maxpedition Thermite Versipack, and I swear, it seems as if that pack was designed to be used as a holster for the MK23!!! The mag pouches on the sides hold the MK23 mags perfectly, the pouch holds the supressor and pistol very securely (after you cut that stupid D ring off the end of the strap), and it's 100% ambidexterous!!! Not only that, you can wear is as a drop leg (has it's own belt so yo udon't have as much gravitational strain on your belt as with a normal drop leg) or as a shoulder holster type deal. Best thing? It has an internal dust cover type thing that you can wrap around your pistol to keep sand, dirt and crap out of it, good for those Quick Pass type sand games.

kalnaren · October 6th, 2007, 23:12

Quote:

Originally Posted by Regan.S

Well now I know when I finally become age of playing that I know how to not lose pistol clips! Unfortuntaly I probably won't remember.

Your pistol takes clips? Awsome. Mine takes magazines.

Renegade) · October 6th, 2007, 23:17

With my G19, I trimmed the tube down a bit so only the front of it folds over the mag, thats all it really needs doesn't need to fold around the entire. Makes for easier mag changes, just flip the front up, change mags, and fold it back down with your pinky finger on the fly.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 5th, 2007, 07:23	#1
six4 Trader rating Join Date: Jan 2006 Location: mission b.c.	mag slippage/accidental loss soft sided pistol holsters,including dropleg platforms, have a tendency to eject the mags,most times without the user nowing about it. i may have found a way to prevent this. all you need is an old bicycle tire tube cut in the appropriate size and fit it over the magwell. see illustrations below. it fits really tight and even when the mag is released it takes pressure to fully eject the mag by hand, so accidental loss should not happen. i will be testing this on the weekend to see if it works.

October 6th, 2007, 17:27	#3
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	I got this tip from CDN Stalker.. hes been using it on his G19 for years now, I dont have the problem with my P226, but I noticed the Glock ejects the mag instanly in my Tornado Holster.. its a simple cheap idea to save your mags. __________________ W1-5

October 6th, 2007, 20:03	#4
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Ya, my idea from two years ago (after I lost a G19 mag from my shoulder holster.......... I've told others about this idea, they often refer to it as "Stalker's Foreskin" and they love it on their Glocks). Works for some guns, not for others. I have a larger peice of tube on my MK23 grip, but it's for grip and not to retain the mag. I've found that when the mag is fully seated it doesn't go anywhere, unless it's overfilled with BBs and doesn't seat properly. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

October 6th, 2007, 14:42	#2
Chrios Trader rating Join Date: Sep 2003	I would love to hear how this turns out...I have the same problem with my pistols, especially the Mk 23. One of my mags fell a good 25 feet when I was climbing down a ladder. No lasting damage was done, fortunately, but I've been paranoid ever since about losing mags.

October 6th, 2007, 20:35	#6
Spawn28 I am manly hear me squeek Trader rating Join Date: Apr 2007 Location: North Bay The Gateway to Hells Ars!	i use electrical tape but that looks like it will work too __________________

October 6th, 2007, 20:52	#7
shifty51 Trader rating Join Date: Jan 2007 Location: Mississauga, Ontario	does the tire tube not make for a lengthy mag change? __________________

October 6th, 2007, 22:44	#8
Regan.S Trader rating Join Date: Aug 2007 Location: Saskatchewan, I'm Lovin' It	Well now I know when I finally become age of playing that I know how to not lose pistol clips! Unfortuntaly I probably won't remember. __________________ Originally Posted by Forever_kaos ... Buy her flowers, say I'm sorry to hear your dog/cat died last night... she asks - What you talking about? you say - I herd something wailing like crazy Might piss her off but the flowers will be nice... Originally Posted by Penguin View Post ... I miss the days where someone would say "I am so depressed, I'm going to kill myself" and 12 consecutive posters would basically say "do it, and stop wasting our time".

October 6th, 2007, 23:17	#11
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	With my G19, I trimmed the tube down a bit so only the front of it folds over the mag, thats all it really needs doesn't need to fold around the entire. Makes for easier mag changes, just flip the front up, change mags, and fold it back down with your pinky finger on the fly. __________________ W1-5

mag slippage/accidental loss

Doctor's Corner