KJW SIG P226 FIRING PROBLEMS!!! HELP!!

desperado2 · March 2nd, 2007, 23:35

The trigger mec seems not to be dispursing the gas...everything seems in order and not broken but the gun wont fire...anyone had this problem and knows how to fix it please contact me thanks.

-Daryl.

Renegade) · March 2nd, 2007, 23:56

dispersing...as in blowing off all the gas with one pull or say shooting all the gas in few shots, or a completely different problem

Kid · March 3rd, 2007, 08:14

You could have broken some internal hammer mech...

Stick your finger into the magwell on the rear side, find a little square hole where the valve on the magazine would line up with -- cock and fire the gun without the mag. If you feel the hammer hit your finger, that isn't the problem.

Also try lubing the valve/filling the mag less full.

desperado2 · March 5th, 2007, 00:20

Yea its deff. somthing that has to do with the piece that hits the valve on the mag....It seems to have a little craiter on it and the valve is pointy so it seems that when the peace hits the valve it just slides up not discharging any gas....kina stupid...anyone know what I could do...Mark Anderson offerd to take a look at it but i have to ship it up to him so before I do anyone know what i should do?

Renegade) · March 5th, 2007, 00:30

Take ur Silicon Oil, and put a few drops on the mechanism, and in the trigger assembly, then cock the trigger back, push down on the small piece that will engage the piece that hits the valve. Push it back in and repeat over and over. This works all the oil into the entire mechs. Then try a mag, see if it improves, if not, you have worse problems.

CDN_Stalker · March 5th, 2007, 01:27

What you do Shaddy is drop it off at your 'friendly neighbourhood stalker's place'!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 2nd, 2007, 23:35	#1
desperado2 Banned Trader rating Join Date: Feb 2005 Location: Ottawa, Ontario	KJW SIG P226 FIRING PROBLEMS!!! HELP!! The trigger mec seems not to be dispursing the gas...everything seems in order and not broken but the gun wont fire...anyone had this problem and knows how to fix it please contact me thanks. -Daryl.

March 2nd, 2007, 23:56	#2
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	dispersing...as in blowing off all the gas with one pull or say shooting all the gas in few shots, or a completely different problem __________________ W1-5

March 5th, 2007, 00:30	#5
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Take ur Silicon Oil, and put a few drops on the mechanism, and in the trigger assembly, then cock the trigger back, push down on the small piece that will engage the piece that hits the valve. Push it back in and repeat over and over. This works all the oil into the entire mechs. Then try a mag, see if it improves, if not, you have worse problems. __________________ W1-5

March 3rd, 2007, 08:14	#3
Kid Trader rating Join Date: Feb 2005 Location: Moose Jaw, SK	You could have broken some internal hammer mech... Stick your finger into the magwell on the rear side, find a little square hole where the valve on the magazine would line up with -- cock and fire the gun without the mag. If you feel the hammer hit your finger, that isn't the problem. Also try lubing the valve/filling the mag less full.

March 5th, 2007, 00:20	#4
desperado2 Banned Trader rating Join Date: Feb 2005 Location: Ottawa, Ontario	Yea its deff. somthing that has to do with the piece that hits the valve on the mag....It seems to have a little craiter on it and the valve is pointy so it seems that when the peace hits the valve it just slides up not discharging any gas....kina stupid...anyone know what I could do...Mark Anderson offerd to take a look at it but i have to ship it up to him so before I do anyone know what i should do?

March 5th, 2007, 01:27	#6
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	What you do Shaddy is drop it off at your 'friendly neighbourhood stalker's place'! __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

KJW SIG P226 FIRING PROBLEMS!!! HELP!!

Doctor's Corner