KSC USP Compact Mag problems

[Dr_Tinshnipz]

Ok, besides the obvious leaky mag ( Know how to fix) I have another problem. The mag will not fit in the mag well of the gun. It will fit if I pull the slide back it will fit snug, then I release the slide either the slide won't go all the way foward or it will force the mag out. I have no idea what the problem is. Also It's always been running on propane.

It happened awhile ago, I lent it to a friend who was taking a test run with airsoft. They went to a flagraiders game, and reported back that it wouldn't work. The day was chilly if I remeber right that might of had something to do with it.



If this is fixable, and when I get it fixed I would like to sell this. I will also replace the slide.

Thanks for your time

[talon]

it's probably the blowback chambre not lubed enough. Look under the slide, and see if the black tube which slides back and forth under it is flush with it's metal counter part. In the manual, that's part 26, sliding into part 21. If it's not flush, just lube it up, slide it back and forth some, set it to be flush again, and then just simply fire it off a few times.

[Dr_Tinshnipz]

Thanks for your help man, soon as I get Silicone oil i'll try that out.

[hattrick]

Originally Posted by talon

it's probably the blowback chambre not lubed enough. Look under the slide, and see if the black tube which slides back and forth under it is flush with it's metal counter part. In the manual, that's part 26, sliding into part 21. If it's not flush, just lube it up, slide it back and forth some, set it to be flush again, and then just simply fire it off a few times.

Replace "probably" with definitly, and mr.talon would be correct. I've had this problem before.

[Dr_Tinshnipz]

Originally Posted by neir

Replace "probably" with definitly, and mr.talon would be correct. I've had this problem before.

Yeah, Thanks guys for the help! I just bought some silicone oil and thats what it was. Now I just have to replace the slide and I might sell.