TM m733 refuses to work

hobbs · August 6th, 2006, 17:17

Hi all,
my tm m733refuses to run, i can get about 1,2 shots off before it freases in the fully cocked pos. then i have to disassemble the gearbox and put everything back together, then i get get about another 1 to 2 shots off before doing it again... ive been without a gun for about a month and this has baffled me please help!!

Upgrades..
Hurcane 120 kit
CA high scilcone wireing
Systema highspeed motar
intellect 9.6V 2000MAH battery

ive tryed almost eveything ive found on this subject, ive tryed the screw in the bottem of the hand grip, re- buliding the gearbox how many times, and buying a new trigger assembly.

everything else is stock please help!!

also the connectors get very hot, with a 30A fuse.

-hobbs

***EDIT***

ok, i think i got the problem icolated(sp?) its the hindge/gear thats scircled in red, because i can run the motar out of the gun fine, so something is preventing the gears from moving, so that would be that piece(can someone tell me the name of it?) or the anti-reversal latch but i dont think its that because i have used the motar in diff positions. Also when i run the motar out of the gun the wires and connetions dont get as hot as when it was in the gun. well on with the pics....

zoom

bruce · August 6th, 2006, 18:29

Have you tried using the original motor instead of the high speed one? The High speed motor sacrifices torque for rpm. The high speed motor may not have enough torque to run the M120S spring.

That piece circled in red is called a cut-off lever. It lets the AEG fire in a semi-auto selection.

hobbs · August 7th, 2006, 00:26

ok, i tryed a CA high torque motor and still nothing...any other suggestions?

GlockFu · August 9th, 2006, 17:20

I was just having a similar problem with my M733. I dont know if it's the same problem for you but check all the wiring. If you see any little nicks or abbrasions tape em up with electrical tape even if it doesnt look like they will do anything. Oh and make sure the battery is fully charged. It worked for me, good luck.

Dismemberd · August 9th, 2006, 17:36

i think he got it working he said he just put in my systema m100 and he says it works now, but i dont know if it still does

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 6th, 2006, 17:17	#1
hobbs Trader rating Join Date: Aug 2006 Location: Elmhurst	TM m733 refuses to work Hi all, my tm m733refuses to run, i can get about 1,2 shots off before it freases in the fully cocked pos. then i have to disassemble the gearbox and put everything back together, then i get get about another 1 to 2 shots off before doing it again... ive been without a gun for about a month and this has baffled me please help!! Upgrades.. Hurcane 120 kit CA high scilcone wireing Systema highspeed motar intellect 9.6V 2000MAH battery ive tryed almost eveything ive found on this subject, ive tryed the screw in the bottem of the hand grip, re- buliding the gearbox how many times, and buying a new trigger assembly. everything else is stock please help!! also the connectors get very hot, with a 30A fuse. -hobbs *EDIT* ok, i think i got the problem icolated(sp?) its the hindge/gear thats scircled in red, because i can run the motar out of the gun fine, so something is preventing the gears from moving, so that would be that piece(can someone tell me the name of it?) or the anti-reversal latch but i dont think its that because i have used the motar in diff positions. Also when i run the motar out of the gun the wires and connetions dont get as hot as when it was in the gun. well on with the pics.... zoom zoom zoom zoom

August 6th, 2006, 18:29	#2
bruce Super Moderator Trader rating Join Date: Aug 2003 Location: Montreal	Have you tried using the original motor instead of the high speed one? The High speed motor sacrifices torque for rpm. The high speed motor may not have enough torque to run the M120S spring. That piece circled in red is called a cut-off lever. It lets the AEG fire in a semi-auto selection. __________________ bruce: Team Bad Karma-(BK-05) : Special Battalion East-(SBE-01)

August 7th, 2006, 00:26	#3
hobbs Trader rating Join Date: Aug 2006 Location: Elmhurst	ok, i tryed a CA high torque motor and still nothing...any other suggestions?

August 9th, 2006, 17:20	#4
GlockFu Trader rating Join Date: Jun 2006 Location: Vancuver	I was just having a similar problem with my M733. I dont know if it's the same problem for you but check all the wiring. If you see any little nicks or abbrasions tape em up with electrical tape even if it doesnt look like they will do anything. Oh and make sure the battery is fully charged. It worked for me, good luck.

August 9th, 2006, 17:36	#5
Dismemberd Trader rating Join Date: Aug 2006 Location: Chicago	i think he got it working he said he just put in my systema m100 and he says it works now, but i dont know if it still does

TM m733 refuses to work

Doctor's Corner