small spring in m4

Dieselboy · December 6th, 2005, 19:19

Hi there,
so my friend just got his new m4 and it came with a weak pin holding the gun together. Any how we took the gun apart(not internally) and we noticed a small spring about 2cm long and 2 mm wide ffall out. We werent sure what or where it came from, but as we put the gun back together the level that you pull but doesnt do anything, wouldnt fully snap back into place so we're thinking it has something to do with that but cant figure out where it goes? any ideas?
Thanks

CDN_Stalker · December 6th, 2005, 19:33

Only thing I can think of (is smaller than you describe, about 1cm long and 1-2mm wide) is the spring that sits on the upper side of the selector switch. It is on the left hand side of the mechbox, on the outside. Is an important spring, see if you can find it. If not, might not be much of a problem to post a wanted add on here to see if anyone has any spares. If not, might find a cut down spring form a Bic lighter (presses the flint into the striker wheel) might work as a replacement.

Best of luck!

Trader rating · December 6th, 2005, 23:05

charger spring? sits right above the hop-up....or the spring that positions the hop-up?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 6th, 2005, 19:19	#1
Dieselboy Trader rating Join Date: Sep 2005 Location: Montreal	small spring in m4 Hi there, so my friend just got his new m4 and it came with a weak pin holding the gun together. Any how we took the gun apart(not internally) and we noticed a small spring about 2cm long and 2 mm wide ffall out. We werent sure what or where it came from, but as we put the gun back together the level that you pull but doesnt do anything, wouldnt fully snap back into place so we're thinking it has something to do with that but cant figure out where it goes? any ideas? Thanks __________________ To find us you have to be smart… To catch us you have to be quick… To beat us you have to be kidding!

December 6th, 2005, 19:33	#2
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Only thing I can think of (is smaller than you describe, about 1cm long and 1-2mm wide) is the spring that sits on the upper side of the selector switch. It is on the left hand side of the mechbox, on the outside. Is an important spring, see if you can find it. If not, might not be much of a problem to post a wanted add on here to see if anyone has any spares. If not, might find a cut down spring form a Bic lighter (presses the flint into the striker wheel) might work as a replacement. Best of luck! __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

December 6th, 2005, 23:05	#3
Droc Guest Trader rating	charger spring? sits right above the hop-up....or the spring that positions the hop-up?

small spring in m4

Doctor's Corner