TM Desert Eagle .50AE Hard Kick

[]D[][]\/[][]D · December 2nd, 2005, 17:44

So I just received my TM Desert Eagle .50AE today and when I took it out of the box the first thing I did was remove the red stopper from the end of the barrel. Second, I loaded some BB's in the magazine that came with it. Third, I placed the full magazine in the gun. Then I cocked the slide and fired my first shot. Stupidly, I cocked the slide again and fired a second shot, not knowing that there was a BB in the chamber already. Then I wasn't able to shoot it again up till now. I checked if there was a BB stuck anywhere inside the gun but there was nothing. I even removed the slide and checked inside the barrel with the cleaning rod that it came with. I also checked the magazine and counted the BB's left inside and added up that I shot 3 BB's out. Then I looked down my hallway and found the 3 BB's that I fired. So what's wrong with my gun, why won't it shoot again? I even tried filling it up with some 134a gas but nothing happens. WTF! :banghead:

__Zero__ · December 3rd, 2005, 00:36

Hmm....I'll See what I can do...

K. Check the Hop up - make shure its not on max

and when you say nothing happens when you fire it now do you mean absolutly nothing or is there a reaction, if so I need details bud.

Kid · December 3rd, 2005, 01:14

Check the loading nozzle.. maybe take the slide off and do a quick check of the internals, make sure nothing is damaged or deformed.

[]D[][]\/[][]D · December 3rd, 2005, 12:08

Yeah when I pull the trigger absolutely nothing happens. Even when I put 134a gas and load up the magazine absolutely nothing happens, and I haven't even touched the hop up yet but it's in the middle. I also took the slide off to check if everything was alright and it seemed alright to me.

BloodSport · December 3rd, 2005, 13:20

might not be relevent, but what brand and weight of BB's are you using.

Stealth · December 3rd, 2005, 13:23

After you fill the mag with gas, can you push the valve in with your finger??

Read the manual. There's a nice diagram teaching you how to fill gas.

[]D[][]\/[][]D · December 3rd, 2005, 15:24

The BB's I was using are the ones that came with the gun. And yeah when I put gas in the magazine I can push the valve down.

Gryphon · December 3rd, 2005, 15:30

If you can push in the mag valve, it means there is no gas in your magazine.

BloodSport · December 3rd, 2005, 15:40

what valve are you trying to fill the gas into? the large one? or the little one on the bottom of the mag.

[]D[][]\/[][]D · December 3rd, 2005, 17:30

There's only one hole at the bottom of my mag. So I'm guessing that that's where you put the gas. How long am I supposed to be putting gas in the mag chamber? I think that's my problem.

Stealth · December 3rd, 2005, 18:45

Read the manual to see how to fill it up properly.

Hold it until liquid starts spewing out.

Mantelope · December 3rd, 2005, 20:09

Remember, hold the mag and the can of gas upside down.

[]D[][]\/[][]D · December 3rd, 2005, 22:59

Ok I held the gas there until liquid came out and still I was only able to fire 2 shots. I think that there's a leak in the chamber but I can't tell because it isn't making that hissing sound.

Kid · December 3rd, 2005, 23:21

Are you SURE that you are filling it with both the magazine and the gas can upside down? Make SURE of this... that sounds like the problem.

[]D[][]\/[][]D · December 4th, 2005, 00:13

Yeah I finally got it, I wasn't filling it right. Thanks for putting up with my bullshit.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 2nd, 2005, 17:44	#1
[]D[][]\/[][]D $[]D[][]\/[][]D's Avatar$ Trader rating Join Date: Dec 2005 Location: Scarborough, ON	TM Desert Eagle .50AE Hard Kick So I just received my TM Desert Eagle .50AE today and when I took it out of the box the first thing I did was remove the red stopper from the end of the barrel. Second, I loaded some BB's in the magazine that came with it. Third, I placed the full magazine in the gun. Then I cocked the slide and fired my first shot. Stupidly, I cocked the slide again and fired a second shot, not knowing that there was a BB in the chamber already. Then I wasn't able to shoot it again up till now. I checked if there was a BB stuck anywhere inside the gun but there was nothing. I even removed the slide and checked inside the barrel with the cleaning rod that it came with. I also checked the magazine and counted the BB's left inside and added up that I shot 3 BB's out. Then I looked down my hallway and found the 3 BB's that I fired. So what's wrong with my gun, why won't it shoot again? I even tried filling it up with some 134a gas but nothing happens. WTF! :banghead:
$[]D[][]\/[][]D is offline$

December 3rd, 2005, 12:08	#4
[]D[][]\/[][]D $[]D[][]\/[][]D's Avatar$ Trader rating Join Date: Dec 2005 Location: Scarborough, ON	Yeah when I pull the trigger absolutely nothing happens. Even when I put 134a gas and load up the magazine absolutely nothing happens, and I haven't even touched the hop up yet but it's in the middle. I also took the slide off to check if everything was alright and it seemed alright to me.
$[]D[][]\/[][]D is offline$

December 3rd, 2005, 13:20	#5
BloodSport Traveling Man Trader rating Join Date: Aug 2001 Location: Moose Jaw, Saskatchewan	might not be relevent, but what brand and weight of BB's are you using. __________________ Saskatchewan Age Verifier! Contact for more Info.

December 3rd, 2005, 00:36	#2
__Zero__ Trader rating Join Date: Dec 2003 Location: The Shadows	Hmm....I'll See what I can do... K. Check the Hop up - make shure its not on max and when you say nothing happens when you fire it now do you mean absolutly nothing or is there a reaction, if so I need details bud.

December 3rd, 2005, 01:14	#3
Kid Trader rating Join Date: Feb 2005 Location: Moose Jaw, SK	Check the loading nozzle.. maybe take the slide off and do a quick check of the internals, make sure nothing is damaged or deformed.

December 3rd, 2005, 13:23	#6
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	After you fill the mag with gas, can you push the valve in with your finger?? Read the manual. There's a nice diagram teaching you how to fill gas.

December 3rd, 2005, 15:24	#7
[]D[][]\/[][]D $[]D[][]\/[][]D's Avatar$ Trader rating Join Date: Dec 2005 Location: Scarborough, ON	The BB's I was using are the ones that came with the gun. And yeah when I put gas in the magazine I can push the valve down.
$[]D[][]\/[][]D is offline$

December 3rd, 2005, 15:30	#8
Gryphon Trader rating Join Date: Mar 2005 Location: MB	If you can push in the mag valve, it means there is no gas in your magazine.

December 3rd, 2005, 15:40	#9
BloodSport Traveling Man Trader rating Join Date: Aug 2001 Location: Moose Jaw, Saskatchewan	what valve are you trying to fill the gas into? the large one? or the little one on the bottom of the mag. __________________ Saskatchewan Age Verifier! Contact for more Info.

December 3rd, 2005, 17:30	#10
[]D[][]\/[][]D $[]D[][]\/[][]D's Avatar$ Trader rating Join Date: Dec 2005 Location: Scarborough, ON	There's only one hole at the bottom of my mag. So I'm guessing that that's where you put the gas. How long am I supposed to be putting gas in the mag chamber? I think that's my problem.
$[]D[][]\/[][]D is offline$

December 3rd, 2005, 18:45	#11
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	Read the manual to see how to fill it up properly. Hold it until liquid starts spewing out.

December 3rd, 2005, 20:09	#12
Mantelope Scotty aka harleyb Trader rating Join Date: Mar 2004 Location: Toronto, Ontario	Remember, hold the mag and the can of gas upside down. __________________

December 3rd, 2005, 22:59	#13
[]D[][]\/[][]D $[]D[][]\/[][]D's Avatar$ Trader rating Join Date: Dec 2005 Location: Scarborough, ON	Ok I held the gas there until liquid came out and still I was only able to fire 2 shots. I think that there's a leak in the chamber but I can't tell because it isn't making that hissing sound.
$[]D[][]\/[][]D is offline$

December 3rd, 2005, 23:21	#14
Kid Trader rating Join Date: Feb 2005 Location: Moose Jaw, SK	Are you SURE that you are filling it with both the magazine and the gas can upside down? Make SURE of this... that sounds like the problem.

December 4th, 2005, 00:13	#15
[]D[][]\/[][]D $[]D[][]\/[][]D's Avatar$ Trader rating Join Date: Dec 2005 Location: Scarborough, ON	Yeah I finally got it, I wasn't filling it right. Thanks for putting up with my bullshit.
$[]D[][]\/[][]D is offline$

TM Desert Eagle .50AE Hard Kick

Doctor's Corner