|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
March 20th, 2017, 18:20
|
#1 |
|
King Arms barrel conversion
Can anyone tell me if a Madbull outer barrel is compatible with a King Arms upper?
__________________
KA M4, G&G SCAR, KWA HK45 |
|
|
|
|
March 21st, 2017, 20:29
|
#2 |
|
It should be fine as long as it's an AEG barrel (assuming you have a KA AEG). Be careful taking the barrel nut off. Use the right tool and a vice if you can. Some are torqued very tightly.
__________________
JG HK416 KWA USP |
|
|
|
|
|
May 11th, 2017, 13:11
|
#3 |
|
I recently modified a KA M4 and was shocked when a whole bunch of my outer barrels wouldn't fit so be careful. I found the KA barrel receiver has a smaller inner diameter than most guns when it comes to the outer barrel so the smart move may be to remover your outer barrel and try a few different ones out at your local shop.
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
