KSC/KWA USP Compact Single Action not working.

br0k3nsa1nt · July 13th, 2016, 08:27

Put a magazine in, rack the slide checking that the valve knocker lines up. Slide is now forward, hammer is cocked. Pull trigger, nothing. Pull again, hammer de-cocks.

It'll fire fine in double-action. I figure I may need to polish a few parts, but since I'm not entirely sure what sets the difference between the single and double action, I'm looking for some insight.

Sent from my iPhone using Tapatalk

RainyEyes · July 13th, 2016, 10:57

Did you do anything to it or is it new?

Sounds like a problem with the slide not returning to battery completely. But no idea why it fires in double only or if that's only coincidence.

Isolate the issue. Does this happen with no magazine in?

br0k3nsa1nt · July 15th, 2016, 10:28

I think I've found my issue. The sear on the right, gets pushed down by the slide when it's not at battery to disable the trigger. When I push it down without the slide on, it is hesitant to pop back up. Tried adding a lil more lube, but I think I'm going to pull the part and smooth the sides with some 1000 grit.

Sent from my iPhone using Tapatalk

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 13th, 2016, 08:27	#1
br0k3nsa1nt Trader rating Join Date: May 2010 Location: London, Ontario	KSC/KWA USP Compact Single Action not working. Put a magazine in, rack the slide checking that the valve knocker lines up. Slide is now forward, hammer is cocked. Pull trigger, nothing. Pull again, hammer de-cocks. It'll fire fine in double-action. I figure I may need to polish a few parts, but since I'm not entirely sure what sets the difference between the single and double action, I'm looking for some insight. Sent from my iPhone using Tapatalk __________________ If it moves, kill it. If it doesn't move, kill it now, It might move later.

July 15th, 2016, 10:28	#3
br0k3nsa1nt Trader rating Join Date: May 2010 Location: London, Ontario	I think I've found my issue. The sear on the right, gets pushed down by the slide when it's not at battery to disable the trigger. When I push it down without the slide on, it is hesitant to pop back up. Tried adding a lil more lube, but I think I'm going to pull the part and smooth the sides with some 1000 grit. Sent from my iPhone using Tapatalk __________________ If it moves, kill it. If it doesn't move, kill it now, It might move later.

July 13th, 2016, 10:57	#2
RainyEyes Trader rating Join Date: Sep 2013 Location: Scarbororororough	Did you do anything to it or is it new? Sounds like a problem with the slide not returning to battery completely. But no idea why it fires in double only or if that's only coincidence. Isolate the issue. Does this happen with no magazine in?

KSC/KWA USP Compact Single Action not working.

Doctor's Corner