Maruzen PPK Difficulties

007PPK · September 19th, 2005, 23:27

Hey,
Just wondering if anyone has encountered the folloowing problem: Everything seems to be in order internally in the gun but when you pull the trigger it fires (with the slide moving normally) but the BB stays inside the barrell. Sometimes the BB will just fall out of the barrell. The BB stop (inside the chamber) seems to be ok and the barrell is clean without any obstructions. At first I thought that it might be a problem with the barrell but a new barrell did the same thing. The mag seems to be giving off the usually thrust of Gas too. This seems to be an all of a sudden thing as it was working fine and one day it started doing this on every shot. Just wondering if anybody knows if it might be a problem with the plunger in the slide or if maybe the gas system may be having problems for some other reason.
Any help appreciated.
Thanks,

Steve :hammer:

Goodriddance · September 19th, 2005, 23:43

I have the same problem with my Maruzen P99. It almost seems as though the slide isn't sliding back all the way, allowing the bb's to cycle and fire properly.

I havent had time to get to my nearest gun tech so I don't know the problem. Its a real pain.

Sgt_Lynch · September 19th, 2005, 23:50

Doctors Corner..

Lisa · September 20th, 2005, 01:58

almost like playing shuffle board

Goodriddance · September 21st, 2005, 05:31

wow you 2 morons were a lot of help. Way to guide the moderators, and point out to the original poster that his post was in the wrong spot. Give yourself a pat on the back. Better yet, quit being a smart ass and answer the question, or shutup.

since nobody on these forums knows anything about this problem, I'll save my energy and leave. If Lisa is a moderator, congrats on wasting space with a boring comment and not helping the situation what so ever.

666 · September 21st, 2005, 06:02

Quote:

Originally Posted by Goodriddance

I'll save my energy and leave.

Good idea.
You honestly expect someone to help you after you came here and called two people morons? I highly doubt it...

007PPK, does it have a hopup? If it does you might want to take a look at it just to make sure it's not messed up in any way.
Also, I haven't seen too many topics about this particular GBB around here, so you might have to look around other airsoft related sites.

007PPK · September 21st, 2005, 22:42

Thanks. Any suggestions on other sites to check out?

Krellik · September 22nd, 2005, 01:23

You can check out http://www.arniesairsoft.co.uk/

He has quite a few reviews and a forums section. Can't hurt to check it out.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 19th, 2005, 23:27	#1
007PPK Trader rating Join Date: Mar 2005	Maruzen PPK Difficulties Hey, Just wondering if anyone has encountered the folloowing problem: Everything seems to be in order internally in the gun but when you pull the trigger it fires (with the slide moving normally) but the BB stays inside the barrell. Sometimes the BB will just fall out of the barrell. The BB stop (inside the chamber) seems to be ok and the barrell is clean without any obstructions. At first I thought that it might be a problem with the barrell but a new barrell did the same thing. The mag seems to be giving off the usually thrust of Gas too. This seems to be an all of a sudden thing as it was working fine and one day it started doing this on every shot. Just wondering if anybody knows if it might be a problem with the plunger in the slide or if maybe the gas system may be having problems for some other reason. Any help appreciated. Thanks, Steve :hammer:

September 19th, 2005, 23:43	#2
Goodriddance Trader rating Join Date: Jun 2005 Location: BC	I have the same problem with my Maruzen P99. It almost seems as though the slide isn't sliding back all the way, allowing the bb's to cycle and fire properly. I havent had time to get to my nearest gun tech so I don't know the problem. Its a real pain. __________________ so we go on with our lives, we know the truth but prefer lies, lives are simple, simple as bliss, why go against tradition when you can, admit defeat, live in decline, be the victim of our own design, the status quo, built on suspect, why would anyone stick out thier neck? fellow members, club "we've got ours"... I'd like to introduce you to our host... He's got his, and I've got mine meet the decline.

September 19th, 2005, 23:50	#3
Sgt_Lynch Trader rating Join Date: Dec 2001 Location: Anger Management class.	Doctors Corner.. __________________ When the going gets tough... the tough go cyclic.

September 20th, 2005, 01:58	#4
Lisa Looking for form T-whatev Trader rating Join Date: Jun 2004 Location: Trenton	almost like playing shuffle board __________________ May you live in interesting times. ASCMART, your smart choice

September 21st, 2005, 05:31	#5
Goodriddance Trader rating Join Date: Jun 2005 Location: BC	wow you 2 morons were a lot of help. Way to guide the moderators, and point out to the original poster that his post was in the wrong spot. Give yourself a pat on the back. Better yet, quit being a smart ass and answer the question, or shutup. since nobody on these forums knows anything about this problem, I'll save my energy and leave. If Lisa is a moderator, congrats on wasting space with a boring comment and not helping the situation what so ever. __________________ so we go on with our lives, we know the truth but prefer lies, lives are simple, simple as bliss, why go against tradition when you can, admit defeat, live in decline, be the victim of our own design, the status quo, built on suspect, why would anyone stick out thier neck? fellow members, club "we've got ours"... I'd like to introduce you to our host... He's got his, and I've got mine meet the decline.

September 21st, 2005, 22:42	#7
007PPK Trader rating Join Date: Mar 2005	Thanks. Any suggestions on other sites to check out?

September 22nd, 2005, 01:23	#8
Krellik Trader rating Join Date: Aug 2005 Location: Saint John, NB	You can check out http://www.arniesairsoft.co.uk/ He has quite a few reviews and a forums section. Can't hurt to check it out. __________________ Today is a good day to die! :kill: Resistance is futile. :borg:

Maruzen PPK Difficulties

Doctor's Corner