Classic Army Aug not firing

shawnahew · March 7th, 2012, 03:25

semi and auto work. But yeah, that sort of jam was odd. In fairness I found a bb rolling around in there, so I think that MIGHT have had some sort of impact.

How would I person take the two stage out? I like the full auto better

shawnahew · March 7th, 2012, 03:28

Thanks much to everybody who helped though. It WAS exactly what I thought it was at the time, but I had not a CLUE how to actually force it to turn over.

lord_sid · March 7th, 2012, 03:35

Its pretty easy since you have the mechbox out. Basically you just remove 2 springs and 2 plastic things (ST14).

In the diagram:
-Disconnect/Remove Trigger spring (ST16).
-Remove 4 screws on ST13. ST13 and STM6 will be connected and come as one. You dont need to take it out of the body.
-Slide ST13 forward away from STM6 till you can remove ST14. Becareful, ST14 springs are compressed and will fly out.
- Put everything back together.
- Grats you no longer had a 2 stage trigger. Its one fluid trigger motion from semi to full.

raphael_double_tap · September 4th, 2014, 23:34

I'm having this exact problem with my CA AugA2 as well. Very disappointed in this gun in general. Anyways In my AUG it seems the cutoff lever gets stuck in between firing semi and full auto. Shorting out contacts gets it going again but it's driving me crazy. Has anyone tried replacing the stock cutoff lever with a new non oem part?
Thanks any help would be great!

Varjeal · September 6th, 2014, 11:24

For an in-game temp fix I took a piece of thin wire and wired the cut-off lever as high as it will go to hold it in place and out of the way, but other than ordering a replacement I don't know of a solution for that.

In other words, had the same problem with mine. Found it had worn both on the front edge and on the inside so it wouldn't function properly and would stick in the middle, simulating a jam.

raphael_double_tap · September 7th, 2014, 20:31

I haven't opened up the mechbox yet but if I notice anything I'll post about it. I'm gonna try replacing the cutoff lever with a new one see if it helps. I have a mosfet installed I may just lock it in semi.

raphael_double_tap · January 2nd, 2015, 00:43

So I tried replacing my cut off lever with a modify lever. Seemed fixed but after a few mags downstairs the jamming started again. You attach the lever with a screw, seems like the lever gets to loose and jams in the middle. I've given up and used my mosfet to lock it into semi auto only. On semi it doesn't seem to jam, or like Varjeal did move it all the way up/ or remove it completely.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 7th, 2012, 03:35	#18
lord_sid Trader rating Join Date: Oct 2004 Location: Windsor, Ontario	Its pretty easy since you have the mechbox out. Basically you just remove 2 springs and 2 plastic things (ST14). In the diagram: -Disconnect/Remove Trigger spring (ST16). -Remove 4 screws on ST13. ST13 and STM6 will be connected and come as one. You dont need to take it out of the body. -Slide ST13 forward away from STM6 till you can remove ST14. Becareful, ST14 springs are compressed and will fly out. - Put everything back together. - Grats you no longer had a 2 stage trigger. Its one fluid trigger motion from semi to full. __________________ TM Steyr Aug A2 (Phantom) : TM Steyr Aug A2 (RIS) : Aftermath Steyr A2 (CQB) : APS Aug A1 H-Bar - 10 Low-Cap, 4 Mid-Cap and 2 Real-Cap Mags TM/KJW G26 - 4 Mags KJW KP-05 Hi-Capa - 2 Regular and 5 Extended Mags Crossman S36P DEAD - 14 Shells Old Buy/Sell Feedback

March 7th, 2012, 03:25	#16
shawnahew Trader rating Join Date: Mar 2012	semi and auto work. But yeah, that sort of jam was odd. In fairness I found a bb rolling around in there, so I think that MIGHT have had some sort of impact. How would I person take the two stage out? I like the full auto better

March 7th, 2012, 03:28	#17
shawnahew Trader rating Join Date: Mar 2012	Thanks much to everybody who helped though. It WAS exactly what I thought it was at the time, but I had not a CLUE how to actually force it to turn over.

September 4th, 2014, 23:34	#19
raphael_double_tap Trader rating Join Date: Sep 2014 Location: southern alberta	I'm having this exact problem with my CA AugA2 as well. Very disappointed in this gun in general. Anyways In my AUG it seems the cutoff lever gets stuck in between firing semi and full auto. Shorting out contacts gets it going again but it's driving me crazy. Has anyone tried replacing the stock cutoff lever with a new non oem part? Thanks any help would be great!

September 6th, 2014, 11:24	#20
Varjeal Banned Trader rating Join Date: May 2011 Location: Beaumont, Alberta	For an in-game temp fix I took a piece of thin wire and wired the cut-off lever as high as it will go to hold it in place and out of the way, but other than ordering a replacement I don't know of a solution for that. In other words, had the same problem with mine. Found it had worn both on the front edge and on the inside so it wouldn't function properly and would stick in the middle, simulating a jam.

September 7th, 2014, 20:31	#21
raphael_double_tap Trader rating Join Date: Sep 2014 Location: southern alberta	I haven't opened up the mechbox yet but if I notice anything I'll post about it. I'm gonna try replacing the cutoff lever with a new one see if it helps. I have a mosfet installed I may just lock it in semi.

January 2nd, 2015, 00:43	#22
raphael_double_tap Trader rating Join Date: Sep 2014 Location: southern alberta	So I tried replacing my cut off lever with a modify lever. Seemed fixed but after a few mags downstairs the jamming started again. You attach the lever with a screw, seems like the lever gets to loose and jams in the middle. I've given up and used my mosfet to lock it into semi auto only. On semi it doesn't seem to jam, or like Varjeal did move it all the way up/ or remove it completely.

Classic Army Aug not firing

Doctor's Corner