|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 12th, 2014, 01:01
|
#1 |
|
Dboy RK03/AKS74 stock hinge fix
Just received a Dboy RK03/ AKS74 in a trade was playing with it in my man cave unfolded the stock and the hinge exploded. Is there any way to replace this hinge plate? I have not even had the chance to game this thing yet.
  
__________________
Arsenal G&G M4, KWC TMP, KJW M1911A1, KWC M92, KWC Mauser M712 Team: Three Amigos |
|
|
|
October 12th, 2014, 09:09
|
#2 |
|
It's this exact reason I only buy Steel receiver AKs (EDIT: ALL STEEL built). The pot metal rear is a massive fail point on collapsible AKs.
If you're super handy with metal working, you could fill the rear flush and fabricate a rear trunnion for a fixed stock, but it would be cheaper just to buy a new receiver/AK.
__________________
  Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur. Last edited by ShelledPants; October 12th, 2014 at 14:32.. |
|
|
|
|
October 12th, 2014, 12:12
|
#3 |
|
a.k.a. Submachinehead
|
Dboys is steel I believe?
Probably a poorer quality steel than LCT. Replace with an LCT from WGCshop would be my recommended course of action. |
|
|
|
|
October 12th, 2014, 14:12
|
#4 | |
|
will always be Mike Litoris in our hearts
|
Well if you are ambitious and dont care about how it looks you could just get a spare hinge from say a cabinet and use that as the new bracket. Depending on how much space there is inside the receiver, you could mount the round part of a hinge inside there to replace the broken part.
I did this for the stock of a TM AK47 with good success. 
__________________
Quote:
|
|
|
|
|
|
October 12th, 2014, 14:30
|
#5 | |
|
|
Quote:
__________________
Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur. |
|
|
|
|
|
October 12th, 2014, 14:35
|
#6 | |
|
Quote:
Difference in the two models are potmetal hinges instead of steel ones. And generally speaking potmetal upper sight block, gas block and front sight.
__________________
|
|
|
|
|
|
October 12th, 2014, 15:30
|
#7 |
|
|
I can get a new steel receiver set from ken at 007 airsoft so I think that's what I will do. I am a welder fabricator so if worse comes to worse I will fix it myself.
__________________
Arsenal G&G M4, KWC TMP, KJW M1911A1, KWC M92, KWC Mauser M712 Team: Three Amigos |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
