Rattle N Hum

siggypoo · February 21st, 2014, 15:42

Okay, no humming, but the cocking handle on my We Scar-L Closed-Bolt GBB rattles to such an extent that I'm tempted to use the SWAG theory and TLAR methods to machine a new folding one based on my old FNC1/ FN FAL.
I've even tried heat shrink tubing, which makes it too snug to fit.
Does anyone have a simpler solution?

Thanks or any help.

Arthur.

siggypoo · March 26th, 2014, 10:40

No joy?
I'm open to any suggestions that'd help. Short of using adhesive, I'm stuck, so to speak.

Wrath144 · March 26th, 2014, 10:50

If heat shrink was too thick try foil tape.

drk242 · March 26th, 2014, 11:53

could a neoprene small /tiny o ring work.
just a shot?

siggypoo · March 26th, 2014, 12:11

@ Wrath:
I could give foil tape a try. I hadn't thought of it.

@drk: I could also try an O-Ring. I've a few handy, though if the thin walls of heat shrink were too thick, I'm not sure I could find an O-Ring that's thinner.

Thanks, both, for your input.

siggypoo · April 7th, 2014, 17:42

Well, guys, a wrap or two of Teflon plumber's tape fixed it in short order. Easy enough to redo when I switch sides or clean anyway, and the tape was 79¢ at CanTire.
Thanks for the inspiration!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 21st, 2014, 15:42	#1
siggypoo Trader rating Join Date: Mar 2009 Location: Oshawa, Ontario.	Rattle N Hum Okay, no humming, but the cocking handle on my We Scar-L Closed-Bolt GBB rattles to such an extent that I'm tempted to use the SWAG theory and TLAR methods to machine a new folding one based on my old FNC1/ FN FAL. I've even tried heat shrink tubing, which makes it too snug to fit. Does anyone have a simpler solution? Thanks or any help. Arthur. __________________ Last edited by siggypoo; February 21st, 2014 at 18:51..

March 26th, 2014, 10:40	#2
siggypoo Trader rating Join Date: Mar 2009 Location: Oshawa, Ontario.	No joy? I'm open to any suggestions that'd help. Short of using adhesive, I'm stuck, so to speak. __________________

March 26th, 2014, 10:50	#3
Wrath144 formerly steyr Trader rating Join Date: Sep 2005 Location: Winnipeg, Manitoba	If heat shrink was too thick try foil tape. __________________ BROFORCE Admin - Winnipeg Airsoft

March 26th, 2014, 11:53	#4
drk242 Trader rating Join Date: Jul 2008 Location: Barrie	could a neoprene small /tiny o ring work. just a shot? __________________ DRK242 TEAM F.I.S.T. Level 2 sniper certified / night operator

March 26th, 2014, 12:11	#5
siggypoo Trader rating Join Date: Mar 2009 Location: Oshawa, Ontario.	Rattle N Hum @ Wrath: I could give foil tape a try. I hadn't thought of it. @drk: I could also try an O-Ring. I've a few handy, though if the thin walls of heat shrink were too thick, I'm not sure I could find an O-Ring that's thinner. Thanks, both, for your input. __________________

April 7th, 2014, 17:42	#6
siggypoo Trader rating Join Date: Mar 2009 Location: Oshawa, Ontario.	Well, guys, a wrap or two of Teflon plumber's tape fixed it in short order. Easy enough to redo when I switch sides or clean anyway, and the tape was 79¢ at CanTire. Thanks for the inspiration! __________________

Rattle N Hum

Doctor's Corner