|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 3rd, 2013, 12:17
|
#1 |
|
tm v3 mp5k is spring connected to piston
cant seem to get the stock spring out is it connected to the piston/piston head anyone know?
dont want to pull it too hard and damage the spring. |
|
|
|
|
August 3rd, 2013, 12:38
|
#2 |
|
Can't Aim worth a damn!! old lady gives me heck for missing the toilet all the time.
|
If it's the same as the replacement TM piston that I bought,then YES, the spring is attached .
http://www.airsoftparts.ca/store2/in...oducts_id=2285 I didn't remove it though, so I can't say how to do that.
__________________
Insert name here: 
|
|
|
|
|
August 3rd, 2013, 12:48
|
#3 |
|
That's standard on TM pistons/springs. To get it out you'd have to unscrew the piston head, which usually involves gripping the head with vice grips and destroying it in the process.
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
August 3rd, 2013, 12:50
|
#4 | |
|
Quote:
|
||
|
|
|
|
August 3rd, 2013, 16:26
|
#5 |
|
TM MP5 is a V2. MP5K is a V3.
Be careful with the parts you buy. Use a vice grip, with a cloth over the piston head. Loosen it then pull the spring out and reinstall the piston head the same way with lock tight on the screw. install new spring and you will be fine.
__________________
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
