Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Sten gun trigger problem

:

Doctor's Corner

Reply
 
Thread Tools
Old April 11th, 2013, 11:40   #1
backspasm
 
backspasm's Avatar
 
Join Date: May 2008
Location: Toronto
Sten gun trigger problem

Some time ago my viva sten stopped cycling properly, and then not at all. I took it apart and connected the battery to the motor unit directly to test it and it seemed to work...at first. On the second pull the motor did not stop for several seconds despite pulling the trigger several times, and it eventually responded by turning off. Basically sometimes it activates and sometimes it does not when pulling the trigger.

The battery is charged, and as far as I can tell none of the wires or connections are corroded or damaged. It seems to be the trigger button does not activate when pulled. Here is a review from another site with the trigger and motor mount pictured at number 4 of disassembley.

http://lrrphk.proboards.com/index.cg...lay&thread=239

Any suggestions (keeping in mind I know very little about this)?
__________________
backspasm is offline   Reply With Quote
Old April 11th, 2013, 12:03   #2
m102404
Tys
 
m102404's Avatar
 
Join Date: Apr 2006
Location: Toronto
I can't take it on to work on it...but from the looks of it the trigger just pushes that button up to complete the circuit.

With the trigger unit/housing separated from the mechbox..if you push the button up do you get power to the motor? If not, either the push button is dead/wonky or the motor has had it. It looks like a short motor and since you need to run those little batteries I wouldn't get anything too strong as a replacement (a standard TM would be fine).

If you do push the button up and it gets power reliably...but not when you're using the trigger....then you might want to look at how the button is mounted...looks like it's screwed into the trigger housing and then held in place with a lock ring (can't see the pics clear enough). You might be able to move it down a bit for a better contact/push from the trigger.
m102404 is offline   Reply With Quote
Old April 11th, 2013, 13:01   #3
backspasm
 
backspasm's Avatar
 
Join Date: May 2008
Location: Toronto
Every time the motor is activated it runs fine, it just doesn't activate every time. I think the button is dead, in which case it seems I should try to disassemble the trigger housing from what you are saying and see if I can play with it to make it work properly. Do you have any suggestions for replacements for either the housing or the entire unit?

Found some pictures from when I took it apart before



__________________

Last edited by backspasm; April 11th, 2013 at 13:39..
backspasm is offline   Reply With Quote
Old April 11th, 2013, 13:06   #4
hattrick
NAAZ's #1 fan!
 
hattrick's Avatar
 
Join Date: Aug 2005
Location: Toronto
Send a message via MSN to hattrick
Rick has a tendency to put things up his butt if you leave them lying around.....might wanna ask him about it!

-mr.mystery
__________________
Quote:
Originally Posted by Brian McIlmoyle View Post
you are going to die..

maybe not from this .. and probably not today... but I assure you, you will die
hattrick is offline   Reply With Quote
Old April 11th, 2013, 14:27   #5
m102404
Tys
 
m102404's Avatar
 
Join Date: Apr 2006
Location: Toronto
It looks like a simple momentary push button....you might be able to find something like it at a place like Active Surplus....or digikey

Otherwise if you message viva they might just mail you the switch...then you'd just have to wire it up.
m102404 is offline   Reply With Quote
Old April 11th, 2013, 14:58   #6
backspasm
 
backspasm's Avatar
 
Join Date: May 2008
Location: Toronto
Thanks for the advice. I will head down to active surplus next week if I can't tweak it into life.

And I thought about that with Rick...you can't trust them pork chop "Germans".
__________________
backspasm is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 16:30.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.