|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
March 2nd, 2013, 22:25
|
#1 |
|
>>Solved<<Polarstar fusion engine, zero air...
Solved, turns out it was a battery problem. My wasn't holding charge, swap to a 9v battery now it runs perfectly.
Hello, I got a polarstar v2 gearbox a little while back, never had a chance to hook it up till last night. After I got it all assembled, tank freshly filled, hooked up battery, and fire. The gearbox nozzle move really fast and smooth, but when I put my finger infront of it to fill the air, there were no air blowing out the nozzle... I don't even know where to start trouble shooting!... Anyone have any idea as to what's going on?
__________________
Smoooth. Last edited by highny; March 5th, 2013 at 01:35.. |
|
|
|
March 2nd, 2013, 23:05
|
#2 |
|
check your switch for the line make sure you have adequate pressure from switch from teh palmer rig from the tank to the unit
|
|
|
|
|
March 3rd, 2013, 01:36
|
#3 |
|
|
I don't think the rig is the problem. The rig worked fine with my tapped pistol.
Here's a video that may help.  Any other ideas?
__________________
Smoooth. |
|
|
|
|
March 3rd, 2013, 10:41
|
#4 |
|
|
Ok check the lines from the unit to the solenoid in teh unit itself, make sure there are no crimps if there are no crimps you need to send it back to get a warranty repair you might have two issue one is a bad solenoid, two is a bad board. Both parts are dirt cheap to replace from Amped airsoft
Last edited by wildcard; March 4th, 2013 at 08:20.. |
|
|
|
|
March 4th, 2013, 02:17
|
#5 |
|
Did you adjust your psi on your air rig? Minimum operating is 80-120psi max, video to blurry to see your gauge.
__________________
 Custom Kydex Holsters - pm me for details Last edited by NVC; March 4th, 2013 at 02:21.. |
|
|
|
|
March 4th, 2013, 23:32
|
#6 |
|
|
Yes, the gauge is set at 100PSI.
As you can see if the video, the nozzle is nearly touching the BB but still no air being blown out. ugh.
__________________
Smoooth. |
|
|
|
|
March 5th, 2013, 01:34
|
#7 |
|
|
Solved, turns out both my battery wasn't holding charge (5.3v-ish vs 9.6v). Swap the connecter and went with a 9v battery. Work like a charm... Odd as to why it need electricity to operate even though it uses hpa....
__________________
Smoooth. |
|
|
|
|
March 5th, 2013, 05:09
|
#8 |
|
aka coachster
|
It needs power to operate the solenoid that controls how much air goes through
|
|
|
|
|
March 5th, 2013, 05:17
|
#9 |
|
fyi, I think you can use something silly like this:
http://hobbyking.com/hobbyking/store...dProduct=28646 if you get sick of 9v's.
__________________
too busy tinkering to play. |
|
|
|
|
March 5th, 2013, 08:50
|
#10 |
|
A firend of mine experienced something like that too... the gun was shooting full auto in semi mode... At first, he thought that the board was toasted, but he tried to change the battery... and that solved his problem as well...
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
