Dan Wesson 6 inch.

Epidemic_ · August 10th, 2012, 15:22

Just ordered a dan wesson 6 inch, and from what i've read it will likely be hot out of the box, just looking for info on what i'll need to reduce that and if its too difficult for a noob, a doctor within an hour or so from brantford.

AngelusNex · August 10th, 2012, 16:16

The one piece that the main spring and spring guide rest on/go into just needs to be shortened about 2-3mm. Put it in a vise, mark 2-3mm with a permanent marker then proceed to file the fuck out of it. That should get you between 350 and 380 and give you far better gas mileage if your still to hot, file off about 1/2 mm at a time between testing till you're good.

Deadpool · August 10th, 2012, 16:21

http://www.airsoftcanada.com/showthread.php?t=140922

4 seconds with the search function!

Epidemic_ · August 11th, 2012, 02:15

Quote:

Originally Posted by Deadpool

http://www.airsoftcanada.com/showthread.php?t=140922

4 seconds with the search function!

I searched but was also looking for a potential gun doctor that may do some work to make sure it is permanent and possibly adjustable.

daishi · August 11th, 2012, 09:30

Quote:

Originally Posted by Deadpool

http://www.airsoftcanada.com/showthread.php?t=140922

4 seconds with the search function!

That is not for a dan wesson and that mod would not work.

shinobii · August 11th, 2012, 09:37

Seems like a lot of work..

Why not this: http://www.mach1airsoft.com/content/6mm-dw-power-down-cartidges-bag-12-pcs

No modification or tampering needed. Inventory is flying off the shelves..

Mach1airsoft team.

Tertion · August 11th, 2012, 09:55

Quote:

Originally Posted by shinobii

Seems like a lot of work..

Why not this: http://www.mach1airsoft.com/content/6mm-dw-power-down-cartidges-bag-12-pcs

No modification or tampering needed. Inventory is flying off the shelves..

Mach1airsoft team.

Strange... differents retailer have these and their claims on the product differ...
Some, including ASG (seems the one who make the gun) effectively tell us that these cartridges reduce the velocity for 50%... others, like AirsoftQC say minus 30-40 FPS (and I know theses guys usualy test their products).

And a 450 (still acording to ASG) fps halved mean a weak 225 fps...

AngelusNex · August 11th, 2012, 12:13

Quote:

Originally Posted by daishi

That is not for a dan wesson and that mod would not work.

The dan wessons are win guns. Only slightly different sights/barrel shapes. That mod is 100% compatible with the dan Wesson revolvers.

Death March · August 11th, 2012, 14:07

I don't game mine,but it shoot's 524fps. No intention to mod it either

Epidemic_ · August 11th, 2012, 23:58

Quote:

Originally Posted by shinobii

Seems like a lot of work..

Why not this: http://www.mach1airsoft.com/content/6mm-dw-power-down-cartidges-bag-12-pcs

No modification or tampering needed. Inventory is flying off the shelves..

Mach1airsoft team.

Awesome, thanks, i'm going to give these a shot before i mod the gun.

daishi · August 12th, 2012, 20:56

Quote:

Originally Posted by AngelusNex

The dan wessons are win guns. Only slightly different sights/barrel shapes. That mod is 100% compatible with the dan Wesson revolvers.

Except for the fact that there is no screw there, and cutting the metal box is a no go.

The insides are infact slightly different as I have modded mine to shoot at 330fps with $2 worth of parts from Canadian tire. Just remove the metal box put in two brass nuts and 1 brass washer. Done.

Quote:

Originally Posted by Epidemic_

Awesome, thanks, i'm going to give these a shot before i mod the gun.

Let us know what these do. Bring in your gun and chrono it stock and then chrono it with these in at the shop! Post up the results when you get the chance.

AngelusNex · August 13th, 2012, 07:52

Quote:

Originally Posted by daishi

Except for the fact that there is no screw there, and cutting the metal box is a no go.

The insides are infact slightly different as I have modded mine to shoot at 330fps with $2 worth of parts from Canadian tire. Just remove the metal box put in two brass nuts and 1 brass washer. Done.

The space for the nut/screw is there AND I cut the box in mine to drop my FPS down to 380. still the same ass the win gun.

daishi · August 13th, 2012, 18:43

Well I was talking more about the fact that he wants something probably that doesn't ruin the stock parts.

No cutting metal involved if you just stick in a few nuts and a washer rather then cutting your box, getting a screw and fiddling with it forever.

p.phresh · August 14th, 2012, 15:13

here's a video of the same mod too:
Dan Wesson BB mod - YouTube

Tertion · August 15th, 2012, 19:13

Quote:

Originally Posted by p.phresh

here's a video of the same mod too:
Dan Wesson BB mod - YouTube

It tell you how to RAISE the fps, not to lower it.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 10th, 2012, 15:22	#1
Epidemic_ Trader rating Join Date: Dec 2011 Location: Brantford	Dan Wesson 6 inch. Just ordered a dan wesson 6 inch, and from what i've read it will likely be hot out of the box, just looking for info on what i'll need to reduce that and if its too difficult for a noob, a doctor within an hour or so from brantford. __________________ Feeble humans. Let us give you, our power. Soon, you'll become unable to resist this, intoxicating power.

August 11th, 2012, 09:37	#6
shinobii Trader rating Join Date: Sep 2008	Seems like a lot of work.. Why not this: http://www.mach1airsoft.com/content/6mm-dw-power-down-cartidges-bag-12-pcs No modification or tampering needed. Inventory is flying off the shelves.. Mach1airsoft team. __________________ Premier Pro-Grade Canadian AEG supplier http://www.mach1airsoft.com/ sales@mach1airsoft.com Like Us on FACEBOOK Follow Us on Twitter Store Hours of Operation: Tue-Wed: 11:00am-5:00pm Thurs: 11:00am-8:00pm Fri: 11:00am-5:00pm Sat: 10:00-5:00pm Retail Store Address: 237 Toryork Drive, Toronto Ontario.

August 11th, 2012, 14:07	#9
Death March Trader rating Join Date: Feb 2006 Location: Manitoba	I don't game mine,but it shoot's 524fps. No intention to mod it either __________________ Death Before Dishonor" Bleeding Black Label"

August 10th, 2012, 16:16	#2
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	The one piece that the main spring and spring guide rest on/go into just needs to be shortened about 2-3mm. Put it in a vise, mark 2-3mm with a permanent marker then proceed to file the fuck out of it. That should get you between 350 and 380 and give you far better gas mileage if your still to hot, file off about 1/2 mm at a time between testing till you're good.

August 14th, 2012, 15:13	#14
p.phresh Trader rating Join Date: Sep 2004 Location: Winnipeg, MB	here's a video of the same mod too: Dan Wesson BB mod - YouTube

Dan Wesson 6 inch.

Doctor's Corner