|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 11th, 2012, 19:26
|
#1 |
|
disassembly problem kjw meu
So I'm trying to take apart my kjw meu full metal i know i need to put the slide back to the smaller notch not the slide catch and then push the pin out....problem is when i push the pin it gets stuck half way. Last time i tried i couldn't push it back in by hand had to tap it gently with a mallet. I don't want to force it and just end up breaking something. Am i doing something wrong here?
__________________
Once more into the fray Into the last good fight I'll ever know Live and die on this day Live and die on this day |
|
|
|
July 11th, 2012, 19:56
|
#2 |
|
will always be Mike Litoris in our hearts
|
Try pushing the barrel back ever so slightly. Also, is the mag out of the gun?
|
|
|
|
|
July 11th, 2012, 20:02
|
#3 |
|
|
alrigh till try that and yes
__________________
Once more into the fray Into the last good fight I'll ever know Live and die on this day Live and die on this day |
|
|
|
|
July 11th, 2012, 20:02
|
#4 |
|
I had the same problem with my MEU but it was the tinted lower, make sure ur take down pin is centred in the holes. If I didn't push it all the way out on the first try it would bind up.
|
|
|
|
|
|
July 11th, 2012, 20:04
|
#5 |
|
|
that worked like a freaken charm thanks
__________________
Once more into the fray Into the last good fight I'll ever know Live and die on this day Live and die on this day |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
