Open chamber WE M4/Scar/PDW/G39/l85

[Eien]

Originally Posted by turok_t

I wouldnt mind getting a few of those

Are these custom engraved or actually from WE themselves?

[SHaKaL]

First game with my Xm177 and M16a1 open bolt.
The ''prong'' on my 2 nozzle broke...



What's the purpose of theses broken prong? To load the bb from mag to the ''chamber''?
I use the Vietnam 20 rounder mags.


Thanks

[MaybeStopCalling]

Yep. It's the loader.

[SHaKaL]

Originally Posted by Green Synergy

Yep. It's the loader.

Damn that suck... so i guess i need to order new nozzles...
When are the new aluminum nozzle will be out for sale?
If they are, how much Ra-tech sell them?

[DAS BOOT]

Originally Posted by LongStone

some new lower receivers available
http://www.enten.co.jp/pulsE-WEM4.html

How would I purchase one and safely ship them here? any ideas?

[unknownvariable]

Originally Posted by SHaKaL

Damn that suck... so i guess i need to order new nozzles...
When are the new aluminum nozzle will be out for sale?
If they are, how much Ra-tech sell them?

You can check out a link at their site to find a retailer. Only the main one on their site has them so far, that I know of. They are back ordered right now. Their next batch is supposed to arrive at the end of the month. RA Tech's store has been down for about a month so direct sales don't seem to be a priority for them.

[pinksoda]

Just recently installed my new Guns Modify steel bolt carry on my scar.... 25 rounds into it i already see a dent on the carry where the hammer usually damage the stock carry. Are there ways to make this not happen or at least prolong replacement?

[Fox62]

Originally Posted by pinksoda

Just recently installed my new Guns Modify steel bolt carry on my scar.... 25 rounds into it i already see a dent on the carry where the hammer usually damage the stock carry. Are there ways to make this not happen or at least prolong replacement?

LOL a dent on the steel? There are no parts on the SCAR that can do that. Be more specific please.


Fox.

[wildcard]

Originally Posted by SHaKaL

First game with my Xm177 and M16a1 open bolt.
The ''prong'' on my 2 nozzle broke...



What's the purpose of theses broken prong? To load the bb from mag to the ''chamber''?
I use the Vietnam 20 rounder mags.


Thanks

The Ra tech ones will break too, I'm waiting for redwolf to send me a replacement for my XM177 mine broke after about 2000 rounds

[SHaKaL]

Originally Posted by wildcard

The Ra tech ones will break too, I'm waiting for redwolf to send me a replacement for my XM177 mine broke after about 2000 rounds

I'm wondering if it's because the '' loading prong'' is hitting the back of the mag part that hold the bb when reloading? Maybe the solution would be to cut it in a ''v'' shape?

Did that to one of my mag, will test it at my next game.

[wildcard]

Originally Posted by SHaKaL

I'm wondering if it's because the '' loading prong'' is hitting the back of the mag part that hold the bb when reloading? Maybe the solution would be to cut it in a ''v'' shape?

Did that to one of my mag, will test it at my next game.

That would be my guess too the WE 20rnd mags have quite a play while the mag is in the gun, although the wobble is miniscule but is it enough to cause the jam and snapped the prong

[SHaKaL]

Originally Posted by wildcard

That would be my guess too the WE 20rnd mags have quite a play while the mag is in the gun, although the wobble is miniscule but is it enough to cause the jam and snapped the prong

Edited my post with a pict of the modification, not perfect but will work on it.

[wildcard]

Originally Posted by SHaKaL

Edited my post with a pict of the modification, not perfect but will work on it.

I know for sure that the steel bolt and the aluminum bolt have somehow a very minor but different sized prongs it's again very minor but enough to cause the bolt to seize up

[pinksoda]

Yes. Its starting to have marks on the bottom front tip of the carrier. I dont want to get to the point where its damaging the nozzle again like my stock carrier did.

---------
The pic is after 25 rounds. As you can see the carrier is new no roller marks yet

[Kos-Mos]

Originally Posted by SHaKaL

I'm wondering if it's because the '' loading prong'' is hitting the back of the mag part that hold the bb when reloading? Maybe the solution would be to cut it in a ''v'' shape?

Did that to one of my mag, will test it at my next game.

I think that you might have found the issue...

I examined all my GBBR mags, and all of them have some marks right there, most probably from the nozzle.

I bought my M4 mags used and my G36 mags have seen a few hundred BBs each.

I broke 2 nozzles on my SCAR and 1 on my G36 (since I have it, but left over parts I got with the gun suggest 4-5 nozzle breaks before).

Did you game it to see the difference?

I think I will at leas round the corner there to help alleviate the issue.

I also broke the "inner" edge of my SCAR bolt in a jam... The little lip going around the nozzle to simulate the real shape of the bolt seems to cause more trouble than anything. I got a BB jam between it and the nozzle, it bent the bolt and jammed the whole thing in the gun... I have cut out the left side completely (it's not visible anyways, and I never got a jam on the right side/ejection port side). Not a jam since then. Hard to describe, but I basically cut the red section and filed the top edge of the cut round (to prevent any jam).