|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
May 12th, 2012, 02:28 | #1 |
Hop-Up replacement
The hop-up unit on my M4 is in need of replacement and I was wondering if there is a hop-up unit that I could order online which comes pre-assembled, so all I would have to do is insert my barrel into it.
If so, Could anyone post a link or name a model I could look into getting. Thanks. |
|
May 14th, 2012, 06:55 | #2 |
No, because somewhere along the line in shipping or elsewhere, the small nub inside would fall out.
|
|
May 16th, 2012, 03:08 | #3 | |
Quote:
I meant assembled as in, the hardware (minus sleeve and nub) Just looking to purchase a hop-up chamber with adjustment gears and o-rings pre-assembled. |
||
May 16th, 2012, 04:45 | #4 |
It takes about 30 seconds to assemble, not sure what the problem is?
|
|
May 16th, 2012, 05:50 | #5 |
It may look daunting at first, but it seriously is a cake walk after the first try as long as you are patient.
Taking your time is key.
__________________
Johann Hansen. 1./SS-Pz-Gren. Rgt. 20. 9th SS Hohenstaufen. Ontario's Largest WW2 re-enactment. OP Woodsman. Join us! |
|
May 16th, 2012, 10:40 | #6 |
There's plenty of videos online showing it step by step.....if you can replace a bettery, you can replace a hop-up. Just don't forget the lube......everything works better with lube.
A dab of silicon gel holds that littel nub in place nicely while the barrel is going in. |
|
|
Bookmarks |
|
|